Removing and installing, adjusting fan shroud

WIS 20-3400

Preceding work: Operation no. of operation texts and work units or standard texts Bottom engine cornpartment panel at front removed and flat rates: (Maintenance Manual 61990).

A. Models 124, 1

Removing and installing, adjusting fan shroud – rysunek
Removing and installing, adjusting fan shroud – rysunek

29, 202

P20-5316–57

remove trim panel (20) at top of radiator, install. Model 129: Model 202: detach coolant line at fan shroud, fit on. Locking pin (18) remove, insert. Fan shroud ring (6) turn to the left, place over fan, install. AN When installing, ensure the engaging studs are correctly located in the fan shroud (6). pull off upward, install. Flat shaped springs (15) remove, install. Fan shroud (5) and fan shroud ring (6)

Note When installing, insert retaining plates (arrows) of fan shroud (5) into the mounts on the radiator. Adjust fan shroud (5) relative to fan.

mhhie RA 20.1234-3400/

B. Model 140

Removing and installing, adjusting fan shroud – rysunek
Removing and installing, adjusting fan shroud – rysunek

Preceding work: Operation no. of operation texts and work units or standard texts Bottom engine compartment panel at front removed and flat rates: (Maintenance Manual 6190). 20-6800

Upper frame cross rember (2)… 2.2… +… remove, install. Locking pin (18) 22… eee eee eee sees rernove, insert. Fan shroud ring (6) …. See eee eee ee ee turn to the left, place over fan, install.

LN When installing, ensure the engaging studs of the fan shroud ring (6) are properly located in the fan shroud (5). Flat shaped springs (15)… 6… 0.0.0 eee pull off upward, install. Fan shroud (5) and fan shroud ring (6) …….. remove, install.

Note When installing, insert retaining plates (arrows) of the fan shroud (5) into the mounts on the radiator. Adjust fan shroud (5) relative to fan.

wthie RA 20.1234-3400/2

C. Model 210

Removing and installing, adjusting fan shroud – rysunek

Preceding work: Operation no. of operation texts and work units or standard texts Waming instructions when hood open and flat rates:

Flat shaped springs (15) pull off upward, install. Fan shroud (5) remove, install.

Note When installing, ensure the retaining plates (arrows) of the fan shroud (5) are inserted into the mounts on the radiator, Adjust fan shroud (5) relative to fan.

adie RA 20.1234-3400/3

Removing and installing, adjusting fan shroud – rysunek
Removing and installing, adjusting fan shroud – rysunek

Models 124, 129

A 16.6 – 19.5 mm B 25.5 – 28.5 mm C 19.5 ~ 25.5 mn

Model 140

A 22–25 mm B 25–28 mm C 17–23 mm

Models 202, 210

A 19–22 mm B 28-31mm > 17–23 mm

Adjusting Flat shaped springs (15) «6… eee eee eee ee pull off upward. Fan shroud (5) with fan shroud ring ………. adjust relative to fan (7) according to the sizes (A), (B), (C). Flat shaped springs (15) 6… cece ene ee eee install.

oth RA 20.1234-3400/4