Testing starting device
WIS 07.3-2353
Operation no. of operation texts and work units or standard texts Proceding work: and flat rates: 07-2353. Testing, adjusting engine (07.3-1100).
038
non > AA (cy: 0 € 4.903
Testers 2… ee eee connect: multimeter (003), engine tester (026), trigger clamp (011), test cable (033) 102 589 04 63 00, ohms decade (038) 124 589 09 63 00, pressure measuring device (043), threaded connector (044). Fuel pressures and internal leaktightness …… test (07.3-1603). Start valve 2. ee eee check operation and leaktightness. Post-start enrichment …………-2.20005test.
wie = RA 07.3.1112-2353/1
Special tools Fg – 102 589 06 63 00
Commercially available tools and testers (see Workshop Equipment Manual) Designation e. g. Make, order no. Multimeter Sun, DMM-5 Digital tester (engine speed, Bosch, MOT 002.02 dwell angle, ignition angle) Sun, 1019
Symbols for testers Symbols for test mode with multimeter
Multimeter Multimeter Contact box DC voltage mode — Contact Multimeter +L Ground DC mode
Test condition Note
® Battery voltage 11–14 V If the specification e.g. of step 2.0 is in order, it is not necessary to perform step 2.1. See corresponding wiring diagram volume for wiring diagrams.
wim = RA 07.3.1112-2353/2
wie =RA 07.3.1112-2353/3
wim §=RA 07.3.1112-2353/4
Electrical test data of post-start enrichment
Basic version and national version, except G) Engine Version Coolant temperature enrichment sensor
Coolant temperature +20 °C (warming-up base value) Resistance 2.3–2.8 kQ
Current at actuator at actuator mA
| 103.94 | KAT as of 08/85 up to 08/87 | 2–6 | ||
| RUF as of 08/85 up to 08/87 | 16–22 | |||
| KAT as of 09/87 | -1 to -5 60 s after start | constant | ||
| RUF as of 09/87 | 16–22 | constant | ||
| KAT as of 09/90 ’) | 0 to -4 60 s after start | constant | ||
| 103.980 | Std. | 15–22 | ||
| 103.982 | KAT | 2–6 | ||
| RUF | 15–22 | |||
| 103.983 | KAT as of 09/90 ’) | 0 to -4 60 s after start | constant | |
| 103.981 | KAT up to 08/87 | 2–6 | ||
| 103.983 | RUF up to 08/87 | 15–22 | ||
| 103.985 | KAT as of 09/87 | -1 to -5 60 s after start | constant | |
| RUF as of 09/87 | 15–22 | constant | ||
| 103.984 | KAT | 0 to -4 60-120 s after start | after start | |
| without KAT | 15–22 60-120 s after start | after start | ||
i) e& CD Cs) GF) as of model year 1991.
wie §=RA 07.3.1112-2353/5
Engine Version Coolant temperature Post-start enrichment sensor +20 °C
Coolant temperature +20 °C (warming-up base value) Resistance 2.3–2.8 kQ
Current at actuator Current at actuator mA mA
| 103.94 | 1987 | 2–6 | 4–8 |
| up to 1989 | O+1 | 4–8 | |
| 1990 | 0–1 14-110 s after start | 8–12 0–8 s after start | |
| 103.98 | 1987 | 2–6 | 4–8 |
| up to 1989 | 0+1 | 4–8 | |
| 1990 | O+1 | 4–8 | |
| 1990 | 0–1 14-110 s after start | 8–12 0–8 s after start |
Arrangement of test cable 102 589 04 63 00
iim §=RA 07.3.1112-2353/6
Arrangement of test cable 102 589 05 63 00
Note
Models 107, 124, 126, 201
Plastic connector of starting valve colored green (previously blue).
Production breakpoint: August 1988
Model Engine Engine end no. Engine end no. manual transmission automatic transmission
107.041 103.982 002059 008946
124.026 103.940 023484 052909
124.030/050/090 103.983 025718 132893
124.226 103.943 000306 000695
124.230/290 103.985 001461 005179
126.020 103.941 003608 012193
126.024/025 103.981 006066 066140
201.029 103.942 011110 015021
wai =RA 07.3.1112-2353/7
Note Start valve with 1.2 amperes (previously 3 amperes) and improved seal at armature.
Production breakpoint: 05/90 Model Engine Engine end no. Engine end no. manual transmission autom. transmission
124.026 103.940 030980 083228
124.030/050/090 103.983 037025 210930
124.226 103.943 000522 001278
124.230/290 103.985 002519 011486 126.020 103.941 004622 015299
126.024/025 103.981 008095 116454
129.060 103.984 000278 001083
201.029 103.942 017184 047204
wim §=RA 07.3.1112-2353/8













