Additional designations for models and components

WIS 07.3-0001

Models and components may have different versions, data and operations in the case of their 3to 6digit designation (e.g. 126 or 126.024). These differences are identified by the following suffixes:

Additional designations for models and components – rysunek

= Standard version (Std.) Identification: none

= Standard (Std.) with retrofitted, open-loop KAT control catalytic converter Identification: none

= Low-compression engine Identification: Engine data plate (not always)

KAT = Low-compression engine with catalytic converter Model or component Identification: engine data plate designation national version

= Engine with ”multi-functional mixture preparation and ignition system” without catalytic converter (reconverted version) {dentification: On connector of EZL and KE injection = ECE

= Engine with „multi-functional mixture preparation and ignition system” with catalytic converter Identification: on connector of EZL and KE injection = KAT

KAT = Engine without catalytic converter (no reconversion solution) Identification: none

wimp =RA 07.3.1112-0001/1

Additional designations for models and components – rysunek

= Australia version, silver information plate

= Switzerland version, green information plate, light green with KAT

= Denmark version

= Japan version, information plate in Japanese Mode! or component designation national version

= Norway version

= Sweden version, blue information plate, Identification: light blue with KAT Information plate on cross-member for @uS) @ eS Gs) etc. = Finland version

= USA version, black information plate California as of 1990: yellow information plate

The respective model year is indicated after the nationality symbol of the national versions if necessary for distinguishing.

If no suffixes are indicated with the designation of models and components, the respective data apply to all the models and components listed in each case.

wie §=RA 07.3.1112-0001/2