Replacing valve seat rings

WIS 05-2900

Replacing valve seat rings – rysunek

Preceding work: Valve guides checked (05-2130)

Valve seat rings (20 and 21) remove with ring seat turning tool. Operating instructions of tool manufacturer

note. Basic bore dia. (D1) measure with internal measuring instrument. Valve seat rings (normal size or repair size) select according to overlap. For repair Size 1. eee eee machine basic bore.

For repair size machine valve seat rings according to basic bore in cylinder head, pay attention to overlap. For repair size turn chamfer (X1) on valve seat rings. Valve seat ring cool with liquid nitrogen and knock in with suitable drift. Valve seats machine (05-2910).

wae =RA 05.1123-2900/1

103.98

Engine

103.94

Valve seat ringInletExhaustInletExhaust
D1Standard size42.50 – 42.5237.50 ~ 37.5245.50 – 45.5241.50 – 41.52
DStandard size42.59 — 42.6037.59 -37.6049.59 – 45.6041.59 – 41.60
Overlap of valve seat rings in cylinder head0.07 – 0.100.07 – 0.10
H8.12 – 8.208.12 — 8.20
t7.8 – 8.27.8 – 8.2
D236.231.239.235.2

Commercially available tools

Cylinder head clamping device eg. Hunger, D-81375 Munchen Order no. 221.60.000

Ring seat turning tool (size 2) eg. Hunger, D-81375 Munchen Order no. 220.03.110

Valve seat turning tool eg. Hunger, D-81375 Munchen Type VDSN 1/45/30, Order no. 236.03.308

Test kit for valve seats eg. Hunger, D-81375 Munchen Order no. 216.93.300

Internal measuring instrument (range 35 – 100 mm)

External micrometer (range 25 – 50 mm)

ue §=RA 05.1123-2900/2