Removing and installing rear engine mount

WIS 22-2120

Operation no. of operation texts and work units or standard texts and flat rates

A. Model 124 4MATIC

Removing and installing rear engine mount – rysunek

P22-0009–17

Transmission 0.2… eee support. Engine carrier (642) …………….2008. remove, install, (M8) 20 Nm, (M10) 40 Nm. Engine mount (638) ………….–.20065 remove, install. Installation 2.2… 2.0… eee ee eee in the reverse order.

Note If the rear engine mount on 4MATIC models is replaced, the engine stop must be slackened after driving about 1000 km and 10000 km, respectively (22-2200).

mime RA 22.1133-2120/1

Model 124 USA (retrofitting)

B. Model 124

Removing and installing rear engine mount – rysunek
Removing and installing rear engine mount – rysunek
Removing and installing rear engine mount – rysunek

Transmission support. Engine carrier (480) or (8) remove, install, (M8) 20 Nm, (M10) 40 Nm. Engine mount (479) or (3) with bracket (5) ….. remove, install, nut (477) or (1) 70 Nm, bolt (7) 45 Nm.

Installation in the reverse order.

Note If the rear engine mount with stop limiter (freeway-hop) is replaced the engine stop must be adjusted after driving about 1000 km and about 10000 km (22-2130).

emits =A 22.1133-2120/2

C. Models 107, 126, 201

Removing and installing rear engine mount – rysunek

Transmission ………0 00.0000 support. Engine carrier (480) ……………2.000. remove, install, (M8) 20Nm, Models 107, 126 (M10) 45 Nm, Model 201 (M10) 40 Nm. Engine mount (479) ………….0200000% remove, install, nut (477) 70 Nm.

sme = RA 22.1133-2120/9

Removing and installing rear engine mount – rysunek

Notes

Modification to rear engine carrier

The sheet metal thickness of the rear engine carrier has been increased from 2 mm to 2.5 mm.

Identification: recess (arrows) on outer edge of engine carrier.

P22-0041–13

Thickness of engine carrier material, production breakpoint: 08/1987

Model Engine Engine end no. Vehicle ident end no. manual automatic transmission transmission A F

124.226 103.940 * , .

124.230 103.983 * . 552574 047874 124.290

. not recorded

Different securing bolt for engine mount to

rear engine carrier

A bolt head with internal torx (previously hexagon socket) is used.

> > 1G P22-0006–31

Internal torx securing bolt, production breakpoint: 10/1985

Model Engine Engine end no. Vehicle ident end no. manual automatic transmission transmission A F 124.226 103.943 000385 000928 * * 124.230 103.985 001824 006698 * * 124.290

nol recorded

mie RA 22.1133-2120/4

D. Model 129

Removing and installing rear engine mount – rysunek
Removing and installing rear engine mount – rysunek
Removing and installing rear engine mount – rysunek
Removing and installing rear engine mount – rysunek

P22 – 5039 – 57

A Manual transmission B Automatic transmission

Transmission… 2.0… ee eee support. Automatic transmission: cable straps of cable of kickdown switch at engine carrier (13) …… slacken, tie. Engine carrier (138) 2… 2… ee ee eee ee eee remove, install, M8 25 Nm, M10 40 Nm

Engine mount (11 of 12) «2.2… eee eee eee remove, install (70 Nm). Washer (9) or pad (10) 62–02 eee eee note.

mime RA 22 :1133-2120/5