Checking, stress-relieving front engine mounts

WIS 22-2115

Preceding work: Bottom engine compartment panel removed (Maintenance Manual Volume 2, Op. no. 6190).

Mode! 124 (except 124.034 and 134.036)

Model 201 (as of 10/84)

Checking, stress-relieving front engine mounts – rysunek

Checking

Gauge (shop-made) or bolt head (waf 13) …… push through between engine mount and cross member (arrow). If gauge cannot be pushed through, the engine mount has settled too much and has to be replaced (22-2110). If the gauge can be pushed through and if a noise problem exists (eg. droning, rumbling), stress-relieve engine mounting.

Stress-relieving

Bolts for rear engine mount at engine carrier …. unscrew (22-2120) Exhaust bracket at transmission …………. detach Exhaust at exhaust manifold …………… unbolt

Top and bottom bolts of front engine mounts … slacken Engine 0… 2… cee ee eee raise until engine mounts are free Engine 20… eee eee eens lower Top and bottom bolts of front engine mounts … _ tighten (22-2110) Rear engine mount ………………008aline. Allow transmission to balance, tighten bolts (22-2120)

emis RA 22.1133–2115/1

Exhaust 0.2… 2. eee eee eee ees bolt to exhaust manifold; tighten bolts evenly. Bolts of exhaust bracket to transmission ……. tighten

Special tools

Checking, stress-relieving front engine mounts – rysunek
Checking, stress-relieving front engine mounts – rysunek

Shop-made tool

Gauge

P22-5030–13

emis RA 22.1133-2115/2