Removing and installing expansion tank

WIS 20-4500

Preceding work: Operation no. of operation texts and work units or standard texts Warning instructions when hood open (01-0085). and flat rates

A. Models 124, 201

Removing and installing expansion tank – rysunek

Cap of expansion tank (1) ………….006. open (release pressure). Coolant 2.0… 0.0… eee ee ee eee drain (until expansion tank is empty), pour into system (20-0100). Connector of plug connection (S41) of coolant level gauge ………-..-.-.22000. unplug, plug in. Coolant hoses (4), (5) …….-….–2-008disconnect, connect. Coolant hose (6) to overflow tank ………… detach, fit on. Nuts (7) or lever nut, model 201. ……..-… unscrew, screw on. Expansion tank (1) 2.2.2… 2… eee eee eee remove, install.

AN Pay attention to rubber mount (9) of expansion tank (1).

«mime §=RA 20.1133-4500/1

Preceding work: Operation no. of operation texts and work units or standard texts Warning instructions when hood open (01-0085). and flat rates

B. Model 129

Removing and installing expansion tank – rysunek

P20 – 5132 – 57

Cap of expansion tank (1) …………..4-. open (release pressure). Coolant 2.2.0… 0c drain (until expansion tank is empty), pour into system (20-0100). Cover (2) 2.0… eee eee unscrew, lift up, install. Connector of plug connection (S41) of coolant level gauge ……………0.2-06unplug, plug in. Coolant hoses (4), (5) 22–0… 22 eee ee disconnect, connect. Coolant hose (6) to overflow tank ………… detach, fit on. Vent line (10) (if fitted) …………2..0–8. take off, fit on, see note. Nuts (7) 0. ee ee unscrew, screw on.

aime =—RA 20.1133-4500/2

Expansion tank (1) 2.2… ee ee ees remove, install.

A Pay attention to rubber pad (9) of expansion tank (1).

Note As of vehicle ident end no. 001 950 an expansion tank with the identification 129 500 03 49 (previously 129 500 01 49) on the top of the tank has been fitted. This tank has a modified vent connection which ensures improved venting of the cooling system. When performing repairs, install this tank.

As of vehicle ident end no. 022 921 an expansion tank with a vent line to the heating system has been installed.

qui §=RA 20.1133-4500/