Replacing piston rings
WIS 03-3170
Preceding work: Piston removed (03-3160).
P03 – 5216 – 57
1 Rectangular ring, contact surface chrome-plated
2 Taper face ring, contact surface precision-turned
3 Bevelled ring with garter spring, contact surtace chrome-plated
Gap and end clearance of piston rings …….. measure, see table. Piston ringS ccc eee eee eee remove with pliers (10) 000 589 51 37 00. Width of piston rings 00005 measure. Piston ring grooves ……………..00005 clean Oil drain bores in piston ring groove ………. clean Piston rings only with identical ring width …… install. Installation position ……………..20005 note, ”Top” faces up. Hooked spring (8) in oil scraper ring (3) ……- install offset 180° to joint (arrow).
waite RA 03.1123-3170/1
Special tool
Test data
| Gap clearance | Groove 1 | 0.20 – 0.40 |
| of piston rings | Groove 2 | 0.20 – 0.40 |
| Groove 3 | 0.20 – 0.45 | |
| End clearance | Groove 1 | 0.015 – 0.050 |
| of piston rings | Groove 2 | 0.020 – 0.040 |
| Groove 3 | 0.010 – 0.045 |
Note When replacing piston rings, determine which rings are installed. When performing repairs, fit pistons only with matching piston rings. Pay attention to piston ring © and height (03-3165).
cui =A 03.1123-3170/2



