Benz-Gaggenau – pojazdy niskopodwoziowe

Produkcja: 1923-1927

Benz type 2 CNb low-floor bus, 1926
Benz type 2 CNb low-floor bus, 1926
Benz type MS low-floor bus, 1923/24

Historia

Historia tej serii nie jest jeszcze przetłumaczona; poniżej oryginał angielski.

In 1925 Benz & Cie. presented the "Nieder-Omnibusse" ("low buses") as newly designed vehicle. The typical feature of the first buses of the type 2 CNa and 2 CNb was the frame lying extraordinary low for that time. The longitudinal frames having been straight up to then, were dropped above the front and the rear axle thus lowering the middle part and the end of the frame. In doing so the bodywork could be mounted on the frame so low that the floor of the superstructure was only 67 cm, and the foot board was a mere 33 cm above the ground. A comparison with today´s low-floor buses of the type O 405 N shows the progressiveness of this type of construction.
This type of vehicle has an entrance height of 23 cm in the front and 34 cm in the rear.

Typy (5)

TypMocDMCLata produkcji
Benz 3 t ciężarówka niskopodwoziowa typ MS40-45 KM przy 1200 obr/min1923
Benz autobus niskopodwoziowy 3 t typ MS40-45 KM przy 1200 obr/min1923
Benz autobus 2-2,5 t typ 2 CN a40-45 KM przy 1200 obr/min1925-1927
Benz autobus 2-2,5 t typ 2 CN a50-55 KM przy 1000 obr/min1925-1927
Benz autobus 2-2,5 t typ 2 CN b50-55 KM przy 1000 obr/min1925-1927