Mercedes-Benz type 300









































General
| Short name | 300 |
|---|---|
| Name | Mercedes-Benz type 300 |
| Model | W 186 II |
| Production | 04.51/11.51 - 04.54 |
| Number produced | 4.563 saloons, 2 chassis |
| Comments concerning the production period | begin of production - pre-production batch / main production - end of production |
| Prices | 19.900,00 DM |
Dimensions and weights
| Wheelbase | 3050 mm |
|---|---|
| Track front/rear | 1480/1525 mm |
| Length | 4950 mm |
| Width | 1838 mm |
| Height | 1600 mm |
| Smallest turning circle | 12,6 m |
| Chassis | 1140 kg |
| Weight empty | 1770 kg |
| According to guideline | DIN 70020 (with fuel, spare wheel and tool equipment) |
| Max. total weight | 2135 kg |
| Max. front axle weight | 1035 kg |
| Max. rear axle weight | 1100 kg |
| Max. load | 365 kg |
| Max. trailer weight braked | 1200 kg |
| Max. trailer weight unbraked | 750 kg |
Engine
| Operating method | four-stroke Otto |
|---|---|
| Configuration | front, parallel; upright |
| Type | M 186 I / 186.920 |
| No. of cylinders/configuration | 6 / in line |
| Bore x stroke | 85 x 88 mm |
| Total displacement | 2996 ccm (tax classification: 2975 ccm) |
| Compression ratio | 6,4 |
| Crankshaft bearings | 7 |
| Output | 115 hp at 4600 /min |
| Maximum torque | 20 mkg at 2500 /min |
| No. of valves/configuration | 1 intake, 1 exhaust / overhead |
| Valve operation | top camshaft |
| Camshaft drive | duplex roller-type chain |
| Mixture formation | 2 downdraught carburetters Solex 40 PBJC |
| Cooling | water cooling / pump; 20 l water |
| Lubrication | pressure circulation lubrication / 6,5 l oil |
Electrical system
| Electric system | 12 V |
|---|---|
| Battery | 56 Ah / in the engine compartment |
| Dynamo | 150 W |
| Starter motor | electrical / 1,0 PS |
| Ignition | battery ignition |
Fuel system
| Fuel tank | in the rear / 65 l; since 02.52: 72 l |
|---|---|
| Fuel supply | diaphragm pump |
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | divided cardan shaft |
| Frame design | X-shaped oval tube frame with centre reinforcement / all-steel body |
| Wheel suspension front | double wishbone |
| Wheel suspension rear | oscillating swing axle |
| Suspension front | coil springs, torsion bar stabilizer |
| Suspension rear | double coil springs, electrically engageable torsion-bar suspension |
| Dampers | hydraulic telescopic damper |
| Steering | worm-and-sector steering, since 1952 recirculating-ball steerg. |
| Steering ratio | 17,9:1 / 3,3 steering wheel turns, since 1952: 21,4:1 / 3,75 |
| Braking system | hydraulic, effective on front- and rear wheels ; drum brakes front and rear |
| Parking brake | mechanical, effective on rear wheels |
| Brake diameter | brake drums front / rear: 260 mm |
| Wheels | sheet steel-disc wheels |
| Wheel rims | drop centre rim 5 K x 15 |
| Tyres | 7,00-15 extra (6 PR) |
Gearbox and performance
| Gearbox | 4-speed gear shift |
|---|---|
| Availability | Series |
| Shifting | Gear shift |
| Clutch | Single-plate dry clutch |
| Type of gearbox | Pinion change gear |
| Synchromesh gears | I - IV |
| Gear ratios | I. 3,68; II. 2,25; III. 1,42; IV. 1,0; R. 3,08 |
| Differential ratio | 4,44 |
| Maximum speed | 155 km/h |
| Acceleration | 18 s |
| Comments | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons |
| Fuel consumption | 13,8 l |
| Acc. to guideline | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % |