Mercedes-Benz type 300 SD













































General
| Short name | 300 SD |
|---|---|
| Name | Mercedes-Benz type 300 SD |
| Model | W 116 D 30 A |
| Production | 02.77/05.78 - 09.80 |
| Number produced | 28.634 |
| Comments concerning the production period | begin of production - pre-production batch / main production - end of production |
| Comments | model for exportation to North America |
| Prices | not available in Germany |
Dimensions and weights
| Wheelbase | 2865 mm |
|---|---|
| Track front/rear | 1521/1505 mm |
| Length | 5220 mm |
| Width | 1870 mm |
| Height | 1425 mm |
| Smallest turning circle | 11,59 m |
| Weight empty | 1745 kg; since 10.79: 1715 kg |
| According to guideline | DIN 70020 (with fuel, spare wheel and tool equipment) |
| Max. total weight | 2205 kg; since 10.79: 2180 kg |
| Max. front axle weight | 1065 kg; since 10.79: 1060 kg |
| Max. rear axle weight | 1140 kg; since 10.79: 1120 kg |
| Max. load | 460 kg; since 10.79: 465 kg |
Engine
| Operating method | four-stroke Diesel (with indirect injection and exhaust TC) |
|---|---|
| Configuration | front, parallel; upright |
| Type | OM 617 D 30 A / 617.950 |
| No. of cylinders/configuration | 5 / in line |
| Bore x stroke | 91,0 x 92,4 mm; since 10.78: 90,9 x 92,4 mm |
| Total displacement | 3005 ccm; ab 10.78: 2998 ccm |
| Compression ratio | 21,5 |
| Crankshaft bearings | 6 |
| Output | 111 hp / 82 kW at 4200 /min; since 10.79: 121 hp / 89 kW at 4350 /min |
| Maximum torque | 23,2 mkg at 2400 /min; since 10.79: 23,5 mkg at 2400 /min |
| No. of valves/configuration | 1 intake, 1 exhaust / overhead |
| Valve operation | top camshaft |
| Camshaft drive | duplex roller-type chain |
| Mixture formation | indirect injection, mechanically controlled; Bosch 5-plunger-type injection pump |
| Cooling | water cooling / pump; 12 l water |
| Lubrication | pressure circulation lubrication / 8,6 l oil |
Electrical system
| Electric system | 12 V |
|---|---|
| Battery | 88 Ah / in the engine compartment |
| Dynamo | three-phase AC / 770 W |
| Starter motor | electrical / 2,5 PS |
| Ignition | compression ignition engine |
Fuel system
| Fuel tank | above the rear axle / 82 l |
|---|---|
| Fuel supply | piston pump at the injection pump |
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | divided cardan shaft |
| Frame design | self-supporting all-steel body |
| Wheel suspension front | double wishbone-front axle with torsion bar type stabilizer |
| Wheel suspension rear | diagonal-swing axle, on demand with hydropneumatic level control |
| Suspension front | coil springs, suppl. rubber suspension, torsion bar stabilizer |
| Suspension rear | coil springs, suppl. rubber suspension, torsion bar stabilizer |
| Dampers | hydraulic telescopic damper |
| Steering | ball-and-nut power steering |
| Steering ratio | 14,02:1 / 2,7 steering wheel turns |
| Braking system | hydraulic dual-circuit braking system with vacuum-operated brake servo unit, since 12.78 on demand with antilock device; disc brakes front (internally ventilated) and rear |
| Parking brake | mechanical (foot-operated), effective on rear wheels |
| Brake diameter | brake discs front / rear: 278 / 279 mm |
| Wheels | sheet steel-disc wheels, on demand light-alloy disc wheels |
| Wheel rims | 6 J x 14 H 2-B |
| Tyres | 185 HR 14 |
Gearbox and performance
| Gearbox | 4-speed autom. gear shift |
|---|---|
| Availability | Series |
| Shifting | Switch lever in car center |
| Clutch | hydr. torque converter in autom. gear |
| Type of gearbox | Planet gear |
| Gear ratios | I. 3,98; II. 2,39; III. 1,46; IV. 1,0; R. 5,47 |
| Differential ratio | 3,07 |
| Maximum speed | 165 km/h; from 10.79: 170 km/h |
| Acceleration | 17,0 s; from 10.79: 16,2 s |
| Comments | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons |
| Fuel consumption | 10,6 l |
| Acc. to guideline | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % |