Mercedes-Benz type 280 SEL













































General
| Short name | 280 SEL |
|---|---|
| Name | Mercedes-Benz type 280 SEL |
| Model | V 116 E 28 |
| Production | 10.73/04.74 - 05.80 |
| Number produced | 7.032 |
| Comments concerning the production period | begin of production - pre-production batch / main production - end of production |
| Prices | 06.74: 31.698,00 DM 02.75: 33.832,80 DM 02.77: 34.854,00 DM 03.77: 34.854,00 DM 01.78: 35.168,00 DM 04.78: 36.870,40 DM 12.78: 37.620,80 DM 05.79: 37.816,80 DM 01.07.79: 38.154,45 DM 16.07.79: 38.894,60 DM |
Dimensions and weights
| Wheelbase | 2965 mm |
|---|---|
| Track front/rear | 1521/1505 mm |
| Length | 5060 mm |
| Width | 1870 mm |
| Height | 1430 mm |
| Smallest turning circle | 11,78 m |
| Weight empty | 1645 kg |
| According to guideline | DIN 70020 (with fuel, spare wheel and tool equipment) |
| Max. total weight | 2165 kg |
| Max. front axle weight | 1050 kg |
| Max. rear axle weight | 1115 kg |
| Max. load | 520 kg |
| Max. trailer weight braked | 1200 kg |
| Max. trailer weight unbraked | 750 kg |
Engine
| Operating method | four-stroke Otto (with manifold-injection) |
|---|---|
| Configuration | front, parallel; upright |
| Type | M 110 E 28 / 110.983, since 02.76: 110.985 |
| No. of cylinders/configuration | 6 / in line |
| Bore x stroke | 86,0 x 78,8 mm |
| Total displacement | 2746 ccm (tax classification: 2717 ccm) |
| Compression ratio | 9,0; since 02.76: 8,7 |
| Crankshaft bearings | 7 |
| Output | 185 hp / 136 kW at 6000 /min; since 02.76: 177 hp / 130 kW at 6000 /min; since 04.78: 185 hp / 136 kW at 5800 /min |
| Maximum torque | 24,3 mkg at 4500 /min; since 02.76: 23,8 mkg at 4500 /min; since 04.78: 24,5 mkg at 4500 /min |
| No. of valves/configuration | 1 intake, 1 exhaust / V-shaped overhead |
| Valve operation | 2 top camshafts |
| Camshaft drive | duplex roller-type chain |
| Mixture formation | manifold-injection, electronically controlled (Bosch D-Jetronic); since 02.76 mechanically controlled (Bosch K-Jetronic) |
| Cooling | water cooling / pump; 11 l water |
| Lubrication | pressure circulation lubrication / 6 l oil |
Electrical system
| Electric system | 12 V |
|---|---|
| Battery | 55 Ah / in the engine compartment |
| Dynamo | three-phase AC / 770 W |
| Starter motor | electrical / 1,4 PS, since 12.77: 2,0 PS |
| Ignition | transistor ignition |
Fuel system
| Fuel tank | above the rear axle / 96 l |
|---|---|
| Fuel supply | electric supply pump |
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | divided cardan shaft |
| Frame design | self-supporting all-steel body |
| Wheel suspension front | double wishbone-front axle with torsion bar type stabilizer |
| Wheel suspension rear | diagonal-swing axle, on demand with hydropneumatic level control |
| Suspension front | coil springs, suppl. rubber suspension, torsion bar type stabilizer |
| Suspension rear | coil springs, suppl. rubber suspension, torsion bar type stabilizer |
| Dampers | hydraulic telescopic damper |
| Steering | ball-and-nut power steering |
| Steering ratio | 14,02:1 / 2,7 steering wheel turns |
| Braking system | hydraulic dual-circuit braking system with vacuum-operated brake servo unit, since 12.78 on demand with antilock device; disc brakes front (internally ventilated) and rear |
| Parking brake | mechanical (foot-operated), effective on rear wheels |
| Brake diameter | brake discs front / rear: 278 / 279 mm |
| Wheels | sheet steel-disc wheels, on demand light-alloy disc wheels |
| Wheel rims | 6 J x 14 H 2-B |
| Tyres | 185 HR 14 |
Gearbox and performance
| Version 1 | Version 2 | Version 3 | Version 4 | |
|---|---|---|---|---|
| Gearbox | 4-speed gear shift | 4-speed gear shift | 5-speed gear shift | 4-speed autom. gear shift |
| Availability | Series (until 04.77) | Series (from 05.77) | by request (until 06.76) | by request |
| Shifting | Feed control | Feed control | Feed control | Switch lever at steering wheel or in car center |
| Clutch | Single-plate dry clutch | Single-plate dry clutch | Single-plate dry clutch | hydr. torque converter in autom. gear |
| Type of gearbox | Pinion change gear | Pinion change gear | Pinion change gear | Planet gear |
| Synchromesh gears | I - IV | I - IV | I - V | |
| Gear ratios | I. 3,90; II. 2,30; III. 1,41; IV. 1,0; R. 3,66 | I. 3,98; II. 2,29; III. 1,45; IV. 1,0; R. 3,74 | I. 3,96; II. 2,34; III. 1,44; IV. 1,0; V. 0,875; R. 3,72 | I. 3,98; II. 2,39; III. 1,46; IV. 1,0; R. 5,47 |
| Differential ratio | 3,69 | 3,69 | 3,92 | 3,69 |
| Maximum speed | 200 km/h | 200 km/h | 200 km/h | 195 km/h |
| Acceleration | 10,5 s | 10,5 s | 10,5 s | 11,3 s |
| Comments | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons |
| Fuel consumption | 12,5 l | 12,5 l | 12,5 l | 12,5 l |
| Acc. to guideline | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % |