Removal and installation of accelerator pedal

WIS 30-330

A. Model 116.120 and model 123.193 1st version

Removal

Removal and installation of accelerator pedal – rysunek

1 Compress spreader clip (arrow) behind accelerator pedal and pull out.

Installation

2 During installation, make sure that spreader clip is reliably engaging.

B. Model 123.193 2nd version and model 126.120

Removal

Removal and installation of accelerator pedal – rysunek
1 Compress spreader clip (arrow) behind acceleratoree ELE:
pedal and pull out.Sg a ae eee UATE
Removal and installation of accelerator pedal – rysunek

2 Slide accelerator pedal in upward direction and rotate by 180°.

3. Pull off accelerator pedal in downward direction, lug (arrow) on accelerator pedal lever should be in alignment with groove in accelerator pedal.

Installation

4 For installation proceed vice versa, making sure that spreader clip is reliably engaging.

The connection from accelerator pedal lever to accelerator pedal is maintenance-free and requires no lubrication.