Adjusting engine stop — Model 123.193
WIS 22-220
Tightening torque
Adjusting screw (11) on rear engine mount
Special tool
Torque wrench with plug-in ratchet, 1/2″ square, 25–130 Nm – 001 589 66 21 00
Note On standard version vehicles up to July 1981, adjust engine stop during inspection (1000–1500 km) and during first service (7500 km).
If a new rear engine mount is installed, also adjust engine stop after 1000–1500 km and 7500 km.
Vehicle should rest on its wheels ready-to-drive.
Adjustment
1 Completely loosen adjusting screw (11) on rear engine mount.
2 Move engine by light manual crosswise shaking.
3 Tighten adjusting screw (11) to 40 Nm.
F2
