Venting Injection System

WIS 07.1-140

Venting Injection System – rysunek

Venting fuel filter

1 Release union screw (3) at fuel filter.

Venting Injection System – rysunek

2 Release knob on hand feed pump and operate this pump until clear fuel (containing no air bubbles) emerges from union screw. Now tighten union screw again.

Venting injection pump

3 Operate hand pump until bypass valve at injection pump opens (audible rattling sound).

4 Retighten knob on hand feed pump.

Note: This forces the pump piston against a sealing ring and seals the hand pump off from atmosphere. \f knob is released during operation, hand feed pump will leak, allowing air to enter fuel system.

5 Run engine and check whether all connections are tight.