Sealing of water pump
WIS 20-225
Self-made tools
Pressing-off disc for impeller
Pressing-in sleeve
rea 60242
Fan hub Sliding ring seal anno Counter-ring
2 Water pump shaft with O-ring compact bearing Impeller 3. Bearing housing
1 Press-off impeller. For this purpose, place pressingoff disc between impeller and bearing housing.
2 Apply light hammer blows at several points between bearing housing and sliding ring seal to cance! the pre-load and force sliding ring seal out.
3 Force counter-ring out of impeller.
Assembly
4 Slightly coat mounting bore of sliding ring seal in water pump housing with sealing compound.
Press-in sliding ring seal by means of pressing-in sleeve or knock out.
Attention ! Support at bearing housing only and not at water pump shaft.
paste and push with chamfered side (arrow) into thoroughly cleaned impeller.
6 Clean sealing surfaces of counter-ring and sliding ring seal free of dust with chamois cloth.
7 Degrease shaft stud and impeller in bore.
8 Press-on impeller flush with shaft while supporting water pump shaft.









