Technical modifications Engines 601, 602,603 Mechanical IV

WIS Tech_Mods-mech4

05 Engine timing, valves

DesignationNature and reason for modificationProduction breakpointOp. no.
Hydraulic valve clearance compensation elementWith double weir to improve ventilationEngine 602 DELA as of start of production05-211
CamshaftDifferent camshaft with code number as of start of and different timing, engine 602.982 DELA in model 210production05-215 05-220
Valve seat ringsExternal dimensions reduced by 1 mm in each case, engines 601.913, 602.96/98, 603.9807/9405-290
Poly V-beltDifferent belt length Engine 602.982as of start of production13-342
Tensioning lever for poly V-beltWith friction bearing Engine 602.982as of start of production13-345

ate TA 05.1034/1

13 Belt drive

DesignationNature and reason for modificationProduction breakpoint Op. no.
Belt driva with additional! guide pulleyEngine 603.971 for avoiding vibrationsStart of production13-342
Tensioning lever for poly V-beltBearing bushings instead of angular- contact roller bearing, model 202Start of production13-345

TA 13.10/1

18 Engine lubrication, engine cooling

DesignationNature and reason for modificationProduction breakpointOp. no.
Oil filter with screw cap Engine 601.913 Engine 602.982Conversion to oil filter with oil- water heat exchanger01/95 start of production18-115 18-110
Modified oil spray nozzles Engine 602.96 Engine 602.982 Engine 603.971Interference-fitted in crankcase01/95 start of production 11/9418-040
Coolant pumpIncreased flow as a result of larger impeller09/9520-215

TA

tie §=RA 18.1045/1