GF18.20-P-1102A Oil fitter bypass valve position/function
WIS 18-1102a
ENGINE 601, 602, 603 (except, 602.982)
Oil filter housing 275 Dished washer 283 Bypass valve 285 Valve seat return flow check valve 286 Valve cone return flow check valve 287 275 Ball 8mm @ 290 285 283 b To bearing points 286 Finely filtered oif to oil pan c 287
| P18.20-0254–01 | ||
| Ke’GF | Position | GF18.20-P-1101-01A GF18.20-P-1102A/1 |
| GF | Function | GF18.20-P-1101-04A GF18.20-P-1102A/2 |
| |GF18.20-p-1 101-014 | Oil filter position | |
The oil filter housing (11) is located at the rear left of the engine.
P18.00-0215–06
GF18.20-P-1101-04A Oil filter function
The oil flows from the feed gallery (a) through the return flow check valve (286, 287) into the oil filter housing and flows directly into the oil filter element (280). It flows through the oil filter element and along the stand pipe (281) and the gallery (b) to the main oil gallery and onto the bearing points. The finely filtered oil flows through the return flow pipe (276) and the gallery (c) to the oil pan. A rubber seal is provided in the oil filter element (280) in order to separate the full-flow and bypass flow. When changing the oil filter element, unscrew the cap (273) and pull it up slightly. When this is done, the return flow pipes (276) attached to the cover opens a passage which connects the galleries (b) and (c) to each other. The oil in the oil filter flows back through the gallery (c) into the oil pan. The return flow pipe is fitted to engines 601, 602 and in engine 603 – 1st version as of 02/92; this return flow pipe can be unscrewed when changing the oil to facilitate removing the oil filter cover.
P18,00-0403–12


