ip # F6 AR30.10-P-1010EC 1

WIS 30-1010EC

F6 AR30.10-P-10106C Adjusting accelerator control 17.3.95

ENGINE 119.981/982/985

ip # F6 AR30.10-P-1010EC 1 – rysunek

6 Accelerator control bell crank

ip # F6 AR30.10-P-1010EC 1 – rysunek

24 Accelerator pedal

29 Adjusting nut

30 Bowden cable

32 Adjusting screw © a Closed throttle stop b Wide open throttle stop B37 __— Pedal position sensor $16/7 Kickdown switch

P30.10-0243–05

Adjusting closed throttle position

Check closed throttle stop Accelerator control bell crank (6) must be making contact with closed throttle stop (a) of the pedal position sensor (B37). Alter adjusting screw (32), if necessary.

Adjusting wide open throttle

With engine switched off, depressLi] Accelerator control bell crank (6) must
accelerator pedal (24) from inside the car asbe making contact with wide open throttle
far as the stop at kickdown switch (S16/7) — stop (b) of the accelerator position sensor
(do not operate kickdown switch!)(B37). Alter adjusting nut (29), if necessary.