teal # K2 AR47.10-P-7000FA 1

WIS 47-7000FA

K2 AR47.10-P-7000FA

Removing and installing fuel gage sender

27.7.94

MODEL 129

teal # K2 AR47.10-P-7000FA 1 – rysunek
teal # K2 AR47.10-P-7000FA 1 – rysunek
teal # K2 AR47.10-P-7000FA 1 – rysunek

A Lever sensor B Immersed tube sensor B4 _—‘ Fuel gage sensor 48/4 Gasket

teal # K2 AR47.10-P-7000FA 1 – rysunek
teal # K2 AR47.10-P-7000FA 1 – rysunek

1 Soft top compartment cover

no. of operation texts or standard texts and flat ratesP47,10-0272–01P47.10-0273–01
Operation texttext
Removing and installing fuel gage sender (1), replacing according to conditionind installing fuel gage sender (1), replacing according to condition –
Removing andinstalling sender fuel gage (1), replacing accordingto condition (fuel tank removed)
installation
explosion from ignition poisoning from inhaling andfuel. Risk of injury as aresult of into contact with skin and eyesNo fire, naked flame or smoking Pour fuels only into suitable and appropriately marked containers Wear protective clothing when handling fuelAS47.00-Z-0001-01A
teal # K2 AR47.10-P-7000FA 1 – rysunek

is full, pump out about 8 liters [i] Except version @» (code 491) as of AR47.10-P-4001B 09/97

# K2 AR47.10-P-7000FA

Li]version(code 491) as of 09/97AR47.10-P-4001F
Unplug coupling (arrow) for fuel gage sender (B4)Secure electric cable to prevent it slipping off
Unbolt sealing flange and fuel gage sender (B4) Lever sensor replaces immersed tube sensorfin]BA47.10-P-1003-01B BT47.10-P-0001-01A H17
Take off hard top
Close soft top far enough so that soft top is raised fully out of compartment and compartment cover (1) is still open
Take out fuel gage sender (B4)
Install in the reverse order
Replace O-ringsLi]oi! to facilitate installation
hnFuel tankuel tank
NumberDesignationModel 129
BA47.10-P-1003-01BSealing flange and fuel gage sender to fuel tankNm40
teal # K2 AR47.10-P-7000FA 1 – rysunek

<= # K2 AR47.10-P-7000FA

teal # K2 AR47.10-P-7000FA 1 – rysunek

Ne S/S – 210 589 01 07 00

Pronged wrench