c6 ARA9.10-P-5531EA Removing, replacing, installing catalytic converter/front section of exhaust 3.8.95
WIS 49-5531EA
<_ # C6 AR49.10-P-5531EA 1
ENGINE 119.985
# C6 AR49.10-P-5531EA
Removal, installation
Remove bottom engine compartment panel, fit on
Remove exhaust system downstream of flanged connection, install
Unplug connectors of O2 sensors (G3/3×1, G3/4×1)
Unscrew bolts (1) at flanged joint of If bolts are tight or thread damaged: catalytic converter/exhaust manifold
F17 Replace rivet nuts in exhaust manifold find
Unscrew nuts (6a) and take off catalytic converter (2)
Unbolt O2 sensors (G3/3, G3/4) [i] installation: coat thread of oxygen sensor with hot lubricating paste fer
v7
Install in the reverse order
# C6 AR49.10-P-5531EA al
| [vel Oxygen sensor | nl Oxygen sensor | |||
| Number | Designation | Engine 119 | ||
| BA14.00-P-1001-01A | Oxygen sensor to exhaust pipe/ Nm exhaust manifold | 55 | ||
| fin | Exhaust manifold | |||
| Number | Designation | Engine 119 | ||
| BA14.10-P-1002-01B | Flanged joint of exhaust manifold or front _ exhaust pipes | Nm | 20 | |
Repair product
Order number Number Designation
Hot lubricating paste 000 989 76 51 BROO.45-P-1006-06A
<= # C6 AR49.10-P-5531EA
\ 000589710300 =f \ 103589013900
Box wrench socket Caulking screw




