Replacing valve stem seals

WIS 05-2700

Replacing valve stem seals – rysunek

Preceding worl: Operation no, of aperation texts and work units or standard texts Valve springs removed (05-2500), and flat rates

Valve stem seals (16) 2.1… cee eee ee eee remove with pliers (1) 104 589 00 37 00. Valve stemS ………..06. see ceo ne eee debur, if necessary. Protective sleeve (2) 20… cee ee ee eee fit onto valve stem, remove. Valve stem seals (16)… ee eee eee eee oil. Valve stem seals (16) 2.0… eee eee ee eee press on by hand with the assembly drift (3). Assernbly drift 104 589 01 43 00 (dia. 8 and 9 mrn) Assembly drift 119 589 00 43 00 (dia. 7 mm)

whhin RA 05.1323-2700/1

Replacing valve stem seals – rysunek

Note Valve stems and assembly sleeves are supplied as a repair kit.

Valve guides which are worn at the retaining groove for the valve stem seals and valves with damaged valve ends or valve stem must be replaced. Valve stem seals with bent metal shell must be replaced.

Replacing valve stem seals – rysunek

Distinguishing features of valve stem seals

othe §=RA 05.1323-2700/2