Function of oil filter

WIS 18-1110

Function of oil filter – rysunek

Oil tilter E Temperature thermostat insert,

1 Central bolt oil cooler feed

2 Seal 10 Temperature thermostat insert 2a Seal qt Sliding sleeve 2b Circlip 16 Compression spring

3 Cap

4 Axial seal DB Oil return check valve 4a Radial seal 12 Valve seat

5 Oil filter housing 12a O-ring

6 Oil fitter element 13 Dished washer

8 Upright pipe 14 Valve cone

9 Oil pressure sensor with seal 15 Compression spring

18 Engine oil filling valve 7 Circlip (new engine, rubber plug)

19 M14 screwplug

20 Seal

othe RA 18.1322~1110/1

A Unfiltered oil to air-to-oil cooler B Unfiltered oil frorn air-to-oil cooler a from oil pump b to bearing points c Oil retum to sump when changing filter d to bearing points and to oil pump e Unfiltered engine oil to cil filter bypass valve in crankcase

© Return check valve

The return check valve prevents the oil filter running dry when the engine is switched off. Opening pressure 0.2 bar.

E Oil cooler feed temperature thermostat element The temperature therrnostat element opens from an oil temperature of approx. 110 °C and feeds the engine oi! through the air-to-oil cooler into the filter chamber of the oil filter.

win RA 18.1322-1110/2