Removing and installing coolant pump

WIS 20-2100

Removing and installing coolant pump – rysunek
Removing and installing coolant pump – rysunek
Removing and installing coolant pump – rysunek
Removing and installing coolant pump – rysunek

Preceding work: Operation no. of operation texts and work units or standard texts Carrier of viscous fan clutch removed (20-3140) and flat rates Belt pulley/vibration damper removed (03-3420). 20-1270

Coolant hoses (4), (5) and (6) …….. eee detach, attach. Connection cover at top (2) with engine lifting eye (1) …….0-. sect ee eee ++. unbolt, bolt on (21 Nin). Gasket (28) 26… eee replace. Model 210 with secondary air injection: retaining plate with switchover valve for secondary air injection ……… eee eee ee eens unbolt at coolant pump (3), bolt on. Coolant pump (3) …… weet eee eee unbolt.

LN Coolant pump housing, see Note. Sealing surfaces ………. Le eee Leeks clean. Gasket (Qa) ………. cece ceca eeees replace.

wth RA 20.1323-2100/1

Coolant pump (8) ……….0-.200+205–2. ~~ fiton, bolt on (21 Nm).

Removing and installing coolant pump – rysunek
Removing and installing coolant pump – rysunek
Removing and installing coolant pump – rysunek

AN Pay attention to different bolt lengths, see bolt diagram. Cooling system… ee eee ee ee eee ee = Check for-leaks (20-0170).

A Engine 119.96 B Engine 119.97/38

10 M860 bolt+ washer 10 M860 bolt + washer W M&x65 bolt+ wash 14 M865 bolt+ washer

13 M8 x85 bolt+ washer 2 ~~, Max 75 bolt + washer

14 M8 x90 bolt washer 13 M8x 85 bolt + washer Roaetner with fan clutch carrier) 14 (toes ne bolt ether

15 M& x 135 bolt+ washer (together with fan clutch carrier) 15. M8 x 135 bolt + washer

Removing and installing coolant pump – rysunek

Special tool

wmibin RA 20.1323-2100/2

Removing and installing coolant pump – rysunek
Removing and installing coolant pump – rysunek

Note Engine 119.97 The coolant pump must not touch the timing case cover at the bottorn (arrows) otherwise the attaching hose and the gasket may not be aligned and the top attaching eye may shear off. Check position of coolant purnp and grind off coolant pump housing, if necessary, in the area of the arrows by about 1 mm.

ation RA 20.1323-2100/3