Coolant preheater in crankcase (installation instruction)

WIS 01-126

Note As of October 1980, the modified screw plug M 38 x 1.5 is installed together with an O-ring.

The chamfer in the crankcase was changed for this treason (2nd version).

Coolant preheater in crankcase (installation instruction) – rysunek
Coolant preheater in crankcase (installation instruction) – rysunek

When installing a coolant preheater, an O-ring or sealing ring to suit the chamfer in the crankcase should be used.

Coolant preheater in crankcase (installation instruction) – rysunek

A 1st version

fs

B 2nd version