Checking expansion tank cap
WIS 20-430
Expansion tank cap
Part No. Code figure Pressure relief valve opens at bar gauge pressure
124 500 01 06 140 Production breakpoint as of November 87
124 501 05 15′) 140 Production breakpoint and spare part as of October 86
123 501 00 15 120 1.2+0.1 Production breakpoint as of June 1983
123 501 02 15!) 120 Spare part until Oct. 86
123 501 01 15 100 1.0+0.2
Vacuum valve opens as of 0.1 bar vacuum
’) Required on vehicles with overflow tank.
Special tools
Tester for cooling system and radiator cap – 001 589 48 21 00
B Double connection for expansion tank cap to tester 00415299 – 000 589 75 63 00
Note
Since June 1983, a cap with increased opening pressure has been installed. It can also be installed in previously manufactured vehicles.
The spare part cap (B) is provided with a springloaded seal and an additional rubber sealing ring and provides a better seal also on older-type expansion tanks with a possibly uneven contact surface.
On vehicles with overflow tank, a cap with higher opening pressure (1.4 bar) must be installed. (1.2 bar 120~27383 up to October 1986, 1.4 bar as of October 1986).
The caps with higher opening pressure ensure at least 1 bar gauge pressure in the cooling system even on older vehicles. This will provide increased protection against coolant ejection.
Checking pressure relief valve
1 Attach double connector 000 589 75 63 00 to tester 001 589 48 21 00 with the retaining clamps.
2 Place expansion tank cap on the double connector.
3 Check the opening pressure by pumping.
Checking vacuum valve
The vacuum valve (arrow) should rest against the rubber seal, be easily lifted and snap back upon release.
20.7—-430/2. F3



