Checking valve springs

WIS 05-260

Data

Engine Valve springs Color code OD Wire dia. Length Spring force at preloaded part No. un- length when new limit value

loaded N N

optional mm mm mm mm (kp) (kp)

inside spring yellow/brown 22.2 21 228–252 205 108 053 00 22!) or 2.5 45 130 053 00 22 purple/brown 22.0–22.4 21.5 235 224–246 116

7 outside spring yellow/red 100 053 01 20 or 34.1~34.5 4.75 49 30.5 863 843-902 purple/red

Checking valve springs – rysunek

1) Engine 116.980/981, 982, 983, 990, 991, 992 and 993 only.

Checkup

In the event of repairs, check valve springs prior to re-use for corrosion.

In addition, check spring force at specified length by means of a spring test scale. If values are less than the lower limit value, renew valve springs.

Attention! Be sure to maintain limit values on engines with hydraulic valve clearance compensating elements. To make sure that this value is not less than specified on valves with a by now lower level (machined valve seats), use valve spring retainer, part no. 130 053 06 25.

Checking valve springs – rysunek
Checking valve springs – rysunek

This valve spring retainer (2) is identified by a machined groove (arrow).

Valve spring retainer, series 2. Valve spring retainer for increased spring force with machined groove 1054 – 9492