Removal and installation of coolant thermostat

WIS 20-110

Removal

Removal and installation of coolant thermostat – rysunek

1 Drain coolant from radiator and cylinder crankcase (20-010).

2 Unscrew housing cover (1) and remove thermostat (3).

Note: On engine 116.981/991 and 117.981 disconnect battery as an additional job, and also remove air cleaner and alternator.

Installation

Removal and installation of coolant thermostat – rysunek

3 Install thermostat with a new sealing ring (2) in such a manner that the ball valve is on top (arrow). During installation, make sure of unobstructed mobility of ball in valve.

4 Add coolant (20—010).

5 Run engine and check for leaks.

R 20-5053