Facing cylinder head parting surface

WIS 01-418

Data

84.8–85.0 Total height of cylinder head

84.0 Minimum height upon machining

in longitudinal direction 0.08 Permissible unevenness of parting surfaces – in transverse direction 0.0

Perm. deviation in parallel of upper parting surface in 0.1 relation to lower parting surface in longitudinal direction

0.006—-0.014 Roughness

Test pressure with air under water in bar gauge pressure (ati)

Valve spacing in relation to cylinder head parting surface

115.923/926 115.951

Engines

9 115.938/939 115,954

Minimum distance A with new valves intake —0.2 +0.1 and new valve seats exhaust —16 —16

Facing cylinder head parting surface – rysunek

Maximum distance A with refinished intake —1.5 —0.9 valve seats and reground valves exhaust -17 —17

Ss NN NANANAAAIAN —-lA —— WW

Facing

Facing cylinder head parting surface – rysunek

1 Face parting surface of cylinder head.

2 Refinish valve seats until minimum distance A is attained.

3 Check timing (05-215).