Checking compression pressure

WIS 01-010

Test values for engine at operating temperature in bar gauge pressure (atii)

Compression Minimum Perm. difference Engine pressure compression between individual normal pressure cylinders

Normal compression up to 1971 10–12 approx. 8.5 — ee max. 1.5 Low compression starting 1977 G) starting 1976 9–10 approx. 7.5 Cs) starting 1976 starting 1972

Special too!

Checking compression pressure – rysunek

Note Check compression pressure at 80° C coolant temperature.

Check cylinders for leaks if compression pressure is below specified minimum (01-015).

Checking

Checking compression pressure – rysunek

1 Unscrew all spark plugs.

2 On model 115, connect contact handle to battery + and to starter terminal 50.

Disconnect cable on ignition coil terminal 1.

Checking compression pressure – rysunek

and terminal 50 to cable connector.

Disconnect cable on ignition coil terminal 1.

Checking compression pressure – rysunek

Lefthand steering

Righthand steering

Checking compression pressure – rysunek

3 Rotate engine several times with ignition switched off in idle speed position, so that residue and soot are thrown out.

4 For checking, rotate engine 8 times while applying full throttle.