WIS 18-005
WIS 18-005
Oil circuit
1 Oil pump without pressure relief valve Intermediate sprocket shaft 1a Oil pump with integrated pressure relief valve Chain tensioner
2 Oil filter Camshaft bearing crank end
3 Bypass valve filter element Oil pipe
4 Oil pressure indicator Bypass valve air-oil cooler
5 Pressure relief valve (5 bar gauge pressure in To air-oil cooler main oil duct front) From air-oil cooler 5a Pressure relief valve in oil pump Oil return flow via chain box (8 bar gauge pressure) Oil return flow through bore in
6 Helical gear shaft (oi! pump and ignition cylinder head and crankcase distributor drive)
Note Only model 115.017 up to chassis end No. 025 505 is provided with an air-oil cooler.
Oil pressure
At operating temperature, the oil pressure at idle may drop to 0.5 bar gauge pressure.
Upon acceleration, the oil pressure should immediately rise again and attain at least 3 bar gauge pressure at 3000/min.
Pressure relief valves
The pressure relief valve has been an integral part of the oil pump for a given period (refer to table).
On vehicles with lower or higher chassis end No., the pressure relief valve is installed in main oil duct at front end.
Installation of oil pump (1a) with integrated pressure relief valve
Chassis end No. Model Engine Engine end No. manual transmission automatic transmission
115.01 115.923 166 003–225 337 031 861–042 929 231 355-310 734 15.015 115.926 010 646-019 493 000 459-000 825 115.017 115.951 014 362–055 002 008 430–030 626 022 155–084 860
115.954 000 001-005 217 000 001–003 284 000 001–008 420 123.023
Opening pressures of bypass and oil pressure relief valves
bar gauge pressure
| Bypass valve filter element | 3.5 |
| Bypass valve air-oil cooler | 1.5 |
| Pressure relief valve in oil pump | |
| Pressure relief valve in main oil duct front end |
14 11 10 Engine 115.951 with air-oil cooler Holding screw (glued-in, 1 do not release) 2 Oil filter top Compression spring 7 8 Valve cone bypass valve oil filter element 9 Closing plug Compression spring 10 V1 Valve seat ring bypass valve air-oil cooler 14 Valve cone bypass valve air-oil cooler 15 Sealing ring Oil filter element 16 17 Sealing ring 18 Sealing ring 19 Sealing ring 22 Oil filter housing 23 Sealing ring 24 Central screw 18
Engines 115.923/926/938/939/954 and 115.951 without air-oil cooler 2 Oil filter top Compression spring 7 8 Valve cone bypass valve oil filter element 9 Closing plug 15 Sealing ring 16 Oil filter element 17 Sealing ring Sealing ring 18 19 Sealing ring 22 Oil filter housing Sealing ring 23 24 Central screw Connection to oil pressure indicator a engines 115.938/939/954 18 b Connection to oil pressure indicator engines 115.923/926/951


