Removing and installing fire wall pivot point with accelerator lever

WIS 30-0012

Removing and installing fire wall pivot point with accelerator lever – rysunek
Removing and installing fire wall pivot point with accelerator lever – rysunek
Removing and installing fire wall pivot point with accelerator lever – rysunek

Operation No. of operation texts and work units or standard texts and flat rates:

AL Model 124 B. Model 129

Cover below instrument panel remove, install. Return spring (85)… detach, attach. Bowden cable detach, attach. unscrew, screw in. Bolts (23) ……..0. Expanding clip (54) … remove, install (model 124). Nuts (52) unscrew, screw on. Tightening torque 0.5 Nm as reference value (model 129).

wih §=RA 30.1211-0012/1

Accelerator pedal (24) with operating lever (33) and fire wall pivot point (48) ….. see ee eee remove, insert.

Note Coat pivot points and ball sockets of throttle control with anti-corrosion grease 000 989 87 51 10. check, adjust if necessary (see 30-1010). Throttle control… 2.2.26. cc ee ewes :

agthiiaym

RA 30.1211-0012/2