Removing and installing guide funnel

WIS 47-7571

Removing and installing guide funnel – rysunek

Operation No. of operation texts and work units or standard texts and flat rates:

Guide funnel (1) …. ran +… remove, install by withdrawing the two rivets (arrows) as far as the stop with puller 123 589 05 33 00, knock in with drift.

A The rivets must not drop into the fuel tank as they neutralize the function of the surge bowl (reserve quantity cannot be used).

Note A guide funnel (1) is installed because of the smatler pistol neck for unleaded fuel. If the fuel tank is replaced, a guide funnel must be installed.

Removing and installing guide funnel – rysunek

Special tool

otis RA A7.4212-7571/1

Removing and installing guide funnel – rysunek
Removing and installing guide funnel – rysunek

Dt Vehicles with KAT except CG: Since June 1989 the guide funnel has additional notches (arrows) to facilitate installation.

amis = RA 47.1212-7571/2