old #54 AR47.10-P-7000BA 1

WIS 47-7000BA

J4 AR47.10-P-7000BA Removing and installing fuel level gauge sensor 30.11.95

MODEL 210.206 /210 /217 /225 /235 /237 /245 /265 /270 /272 1274 /281 /282

old #54 AR47.10-P-7000BA 1 – rysunek

89/2. Gasket B4 Fuel gauge sender Arrow Connector

P47,10-0330–06

# 34 AR47.10-P-7000BA

Removing, installing
Risk of explosion from ignition. Risk of poisoning from inhaling and swallowing fuel. Risk of injury as a result of fuel coming into contact with skin and eyes.No fire, naked flame or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel.
Pump out fuelLi] Draining fuel tank, filling.8 if fuel tank is full, about litersH1
Remove trim for fuel tank in trunk
for fuel Unplug coupling (arrow) gauge sensor (B4) (and pressure sensor, Gs only)Li] Fuel sensor form a unit.and gauge sensor (B4) pressure
Open bayonet lock of fuel gauge sender (B4)IZ]00
Take fuel sender out gauge (B4)(©®) installation: Oil to facilitate installation.replace gaskets (89/2).
Install in the reverse order.
old #54 AR47.10-P-7000BA 1 – rysunek
old #54 AR47.10-P-7000BA 1 – rysunek

iy # 34 AR47.10-P-7000BA

old #54 AR47.10-P-7000BA 1 – rysunek

/

Pin wrench