Replacing spark plugs

WIS 15-1031

Operation No. of operation texts and work units or standard texts and flat rates:

A. Replacing

Replacing spark plugs – rysunek
Replacing spark plugs – rysunek
Replacing spark plugs – rysunek
Replacing spark plugs – rysunek

Cover (21) 2… ……0… 000 cee eee detach, fit on. Spark plug connector (arrow) 2.0.00. 000% slacken by turning to right and left, pull off, fit on. Blow out recesses with compressed air.

, LN When fitting on, ensure ignition cables are correctly routed. Ignition cables 2… eee clean.

antigen = RA 15.1212-1031/1

Spark plugs ………. vee eee eee ween unscrew, screw in; renew if necessary. Tightening torque 20–30 Nm. For installing, use approved spark plug wrench 119 569 01 09 00. Use only approved spark plugs with flat seat and seal. Check electrode gap. Specification = 0.8 mm.

Replacing spark plugs – rysunek

Special tool

Note Since February 1991 the spark plug connectors are partially screened (Beru and Bosch).

Production breakpoint: February 1991 Model Engine Engine end no. Engine end no. Manual transmission Automatic transrnission

124.031 104.980 005464 023786 124.051 124.091

athe §=RA 15.1212-1031/2

Bosch or Beru spark plugs which are marked with a „O”” have a center electrode with a larger diameter, e. g. BOSCH H7DCO BERU 14K~7DU0

Since September 1989 Champion spark plugs have been installad which have a center electrode with a copper core. These spark plugs are identified with a „C”, e. g.

Replacing spark plugs – rysunek
Replacing spark plugs – rysunek

CHAMPION S10YCC

athe §=RA 15.1212-1031/3