Removing and installing accelerator pedal

WIS 30-1321

Operation no. of operation texts and work units or standard texts and flat rates: 30-1321.

A. Model 107

Removing and installing accelerator pedal – rysunek

Lugs of expanding clip (24a) compress behind accelerator pedal (24), remove expanding clip (24a), engage.

Installation note

Ensure that the expanding clip engages properly. Accelerator pedal (24) pull off the attachment plate (54), fit on. Pivot piece (37) pull off accelerator pedal lever (33), fit on.

wii §=RA 30.1142-1321/1

Accelerator pedal (24) pull off accelerator pedal lever (33), fit on.

Note The bearing points should be coated with anticorrosion grease 000 989 87 51 10.

B. Models 124, 126, 201

Removing and installing accelerator pedal – rysunek

P30-5041–17

Lugs of expanding clip (24a) compress behind accelerator pedal (24). Remove expanding clip (24a), engage.

installation note

Ensure that the expanding clip engages correctly. Accelerator pedal (24) ……………00005 pull off the attachment plate (54), fit on and turn 120° to the left.

lim RA 30.1142-1321/2

Accelerator pedal (24) wee eee ee ee pull off accelerator pedal lever (33) down, fit on. When this is done, the lug (33c) on the accelerator pedal lever must be aligned with the groove (arrow) in the accelerator pedal.

Note The bearing points should be coated with anticorrosion grease 000 989 87 51 10. The connection from accelerator pedal to accelerator pedal is maintenance-free and does not require to be lubricated.

C. Model 129

Removing and installing accelerator pedal – rysunek

Cover below instrument panel Lee eee eee eee remove, install. cee ee eee eee ee pull off, fit on. Circlip (55) ……….. Pin (66) …………. cee ee eee eee press out, insert.

time §=RA 30.1142-1321/3

Nut (57) 2.0… 2… ee eee ee eee unscrew, screw on (reference value 0.5 Nm), take off accelerator pedal, fit on.

Note The bearing points and also the ball sockets should be coated with anti-corrosion grease 000 989 87 51 10.

wii §=RA 30.1142-1321/4