Testing oxygen sensor failure indicator

WIS 14-0116

Testing oxygen sensor failure indicator – rysunek
Testing oxygen sensor failure indicator – rysunek

Al Instrument cluster KV 7-pin overvoltage protection relay 87E A1e10 Oxygen sensor indicator lamp, up to model year N3 KE contro} unit 1987. As of model year 1988 CHECK ENGINE a To KE conto! unit (N3) contact 1 indicator lamp (A1e26).

Special tools

Testing oxygen sensor failure indicator – rysunek
Testing oxygen sensor failure indicator – rysunek
Testing oxygen sensor failure indicator – rysunek

Commercially available tools and testers (see Workshop Equipment Manual) Designation e.g. Make, order no. Multimeter Sun, DMM-5

iim =RA 14.1132-0116/1

Symbols for testers Symbols for test mode with multimeter

=@* = Multimeter Contact box DC voltage mode — Contact =@*+ Multimeter

_- Connector

—L Ground Resistance mode

Preconditions for test

Note If the specification of a main test step, e.g. test

® Battery voltage11-14 V

step 1.0, is in order, proceed with the next main See appropriate wiring diagram volume for test step, e.g. test step 2.0. wiring diagrams. If the specification of a main test step, e.g. test step 3.0, is not achieved, continue test with sub-test step, e.g. test step 3.1.

As of model year 1992 the CHECK ENGINE indicator lamp (A1e26) for Gs4) Federal is no longer fitted.

Test stepTest scopeTest connectionOperation/ RequirementSpecifi- cationPossible cause/Remedy
1.0Oxygen sensor failure indicator ’)Visual checkIgnition: ONOxygen _ Indicator lamp faulty, sensor indicator lamp 1) (A1e10) lights up briefly.oxygen sensor indicator lamp (Ate10) 1) has no voltage, Open circuit in wiring cable (A1e10) — (N3) contact 15, Test KE control unit

1) As of model year 1988: CHECK ENGINE failure indicator (A1e26).

time) =RA 14.1132-0116/2

Testing oxygen sensor failure indicator – rysunek
1)Up to model year 1987.
2)As of model year 1988.
Testing oxygen sensor failure indicator – rysunek

Oxygen sensor failure indicator @s)

as of model year 1986

A failure of the oxygen sensor is indicated in the instrument cluster (A1) by the oxygen sensor indicator lamp (A1e10) lighting up or, as of model year 1988 CHECK ENGINE indicator lamp (A1e26). The indicator lamp is actuated by the KE control unit.

Note When the ignition is switched on, the indicator lamp lights up briefly.

time =RA 14.1132-0116/3

Testing oxygen sensor failure indicator – rysunek

As of model year 1988 the Oo-SENSOR indicator lamp in the instrument cluster has been replaced by the CHECK ENGINE indicator lamp.

iim =RA 14.1132-0116/4