Replacing valve stem seals
WIS 05-2700
Operation no. of operation texts and work unils or standard texts Preceding work: Valve spring removed (05-2500). and flat rates
P05-5511–57
Valve stem seals (59) pull off with pliers, special tool Surface of valve stems ……………008. check (visual or finger check). Replace valves with rough stem surface or burrs. Protective sleeve (2) ……..-….0.02008fit onto valve stem, remove Valve stem seals (59) …………….020oil Valve stem seals (59) press on by hand – 606 589 00 37 00
AN Pay attention to different valve stem seals for the inlet and exhaust valves; see „Valve stem seal versions”
waite RA 05.1123-2700/1
Special tool
Notes
Exhaust and inlet valve stem seals and assembly sleeves are supplied as a repair kit. The assembly sleeves must be used in order to avoid damage to the valve stem seals.
Valve stem seal versions
Distinguishing features:
A As the sets of seals contain valve stem seals for the inlet and exhaust valves, pay attention to the distinguishing features (see ill.).
A Exhaust valve stem seal d = 8.2mm POS-2017–13 Arrow = straight chamfer 49/1 = bright galvanized wire ring (yellow)
B inlet valve stem seal d = 7.3mm Arrow = chamfer with shoulder 48/1 = phosphatized wire ring (black)
wie =—-RA 05.1123-2700/2
Modification to material of inlet valve stem seal Valve stem seals manufactured from Viton as of 09/1989 in order to reduce oil consumption. Identification: brown colored material.
A If increased oil consumption exists, install only valve stem seals made of Viton. The valve stem seals made of Viton can also be fitted to engines manufactured prior to this date.
Inlet valve stem seals made of Viton, production breakpoint: 09/1988
Model Engine 1) Engine end no. Vehicle ident end no. automatic manual F transmission transmission A
107.041 103.982 093576 002077 009047
124.026 103.940 0390604 023610 053472 850581
124.030 103.983 088802 026036 134666 848855 124.050 124.090
124.226 103.943 852771 000313 000720
124.230 103.985 853827 089264 001503 005305 124.290
126.020 103.941 003626 012264 436275
126.024 103.981 006129 436792 067114 126.025
201.029 103.942 015479 456546 461032 011239
not recorded 1) Reconditioned engines as of November 1988, as of engine no. 830 569
wage = RA 05.1123-2700/3




