Removing and installing front engine mounts
WIS 22-2110
Preceding work: Warning instructions when hood open (01-0085). Bottom engine companment panel removed (Maintenance Manual Volume 2, Op. no. 6190).
Models 107, 124, 124 4MATIC, 126, 201
P 19-0136 -55
Ground cable at battery detach, attach (step 1). Air SCOOP 2… eee remove, install (step 2). Fan shroud… 2… ee ee ees detach, attach (step 3). Bolts (627) 22.20… 2. ee eee eee unscrew, screw in, 55 Nm (steps 4 – 5). Engine 0.22. ee ee eee raise, lower (step 6). Bolts (523) 2… 2… eee eee unscrew, tighten, Model 124, 201 40 Nm, Model 107, 126 70 Nm, (step 7). Engine mounts (522) …………….0000remove, install (step 8). Installation 2.2… 2.2… eee eee in the reverse order.
mite RA 22.1133-2110/1
Tightening torques in Nm
| Hexagon socket screw for engine mount to frame cross member, Model 124, 201 | 40 |
| Hexagon socket screw for engine mount to frame cross member, Model 107, 126 | 70 |
| Hexagon bolt for engine mount to engine support | 55 |
Notes
Modifications to engine mount and engine
shock absorber
Modified engine mounts, shield and engine shock absorber with additional protective hose are fitted.
These measures reduce stuttering and vibrations when engine idling.
Identification: modified part number (see table).
Production breakpoint: 10/1985
Designation Present Part No. Previous Part No.
Right engine mount 123 241 52 13 124 241 12 13
Left engine mount 123 241 50 13 123 241 09 13
Right shield 123 241 11 34 126 241 04 34
Engine shock absorber 126 240 02 48 123 240 23 48 with white dot
Protective hose 126 241 00 33 –
Production breakpoint: 10/1986
Model Engine Engine End No. Vehicle Ident End No. manual automatic transmission transmission A F 126.026 103.941 * . . .
126.024 103.981 * . 289105 * 126.025
nol recorded
eit RA 22.1133-2110/2
Modifications to shield for right engine
mount The shape of the shield has been modified. It is provided with a recess (arrow) for the locating lug on the engine mount.
A Previous version B Present version
Shield, production breakpoint: 03/1988
Model Engine Engine End No. Vehicle Ident End No. manual automatic transmission transmission
124.026 103.940 019887 044280
124.030 103.983 021817 113910 124.050 124.090
201.029 103.942 009488 013000
not recorded
Material modifications to front engine mount
Use of a higher damping rubber blend has produced improved strength.
Production breakpoint: 07/1989 (without air conditioning or automatic climate control) Model Engine Engine End No. Vehicle Ident End No. manual automatic transmission transmission A F
027368 068696 * * 124.026 103.940
124.030 103.983 032118 175999 * *
124.050 124.090
201.029 103.942 014824 033294
not recorded
wine RA 22.1133-2110/3
Engine mount material, prod. breakpoint: 07/1989 (with air cond. or autom. climate control) Model Engine Engine End No. Vehicle Ident End No. automatic manual transmission transmission A F
068978 124.026 103.940 * * *
124.030 103.983 * 175887 124.050 124.090
201.029 103.942 * 033259
not recorded
Dimensional modification to front engine
mounts
2 mm higher engine mounts are installed at the front. In addition, recesses (arrow) are provided on the bottom of these engine mounts and lugs on the engine supports. This enables the engine mounts to be installed free of stress.
P22-2005–13
The modified engine mounts can likewise be fitted to cars manufactured prior to this date.
Engine mounts of the previous and modified versions must not be installed together.
Model 124, 201
Production breakpoint for engine mounts: 02/1989 Production breakpoint for engine supports: 08/1989
wae = RA 22. 1133-2110/4
Modification to shield for front engine mounts The shape of the shield for the front engine mount has been modified.
Shield, production breakpoint: 01/1990 Model Engine Engine End No. Vehicle Ident End No. manual automatic transmission transmission A F 129.060 103.984 000175 000653 . * not recorded
Modification of shield for right engine mount,
Model 126
The shield has been standardized with that used on engines 116 and 117.
Shield, production breakpoint: 02/1987
Model Engine Engine End No. Vehicle Ident End No. manual automatic transmission transmission A F
126.020 103.941 * . * *
126.024 103.981 * * 318672 * 126.025
not recorded
mime = RA 22.1133-2110/5
Special tool
Removal, installation
1 Detach ground cable at battery.
2 Detach air scoop from air filter.
3 Remove fan cowl and place over the fan.
Installation instruction
Introduce catches into the mounts on the radiator.
4 Unscrew bolts (627) on right engine mount from above.
Note A shield (626) is installed above the right engine support.
Installation instruction
Tightening torque 55 Nm.
mine = RA 22.1133-2110/6
5 Unscrew bolt (627) at the left engine mount.
Installation instruction
Tightening torque 55 Nm.
Models 124, 201
Installation instruction
Anti-twist lock (632) on left and right engine mounts must engage into the retaining slot (631) of the engine support.
6 Attach engine to the front suspension lug and raise slightly. Pay attention to the rear suspension lug, oil filter and coolant hoses.
7 Remove screws (523) on the left and right front engine mounts from below.
quam = RA 22:1133-2110/7
4MATIC
Remove 2 bolts (arrow) from below.
Installation instruction Tightening torques Model 124, 201 40 Nm, Model 107, 126 70 Nm.
8 Take out engine mount.
Note The engine mounts on the left and right are identical.
Installation is performed in the reverse order.
wus = RA 22 1133-2110/8









