Engine bearing cooling, model 201 (retrofitting)

WIS 22-2140

Preceding work: Bottom engine compartment pane! removed (Maintenance Manual 6190).

‘Model 201

not with underbody protection

not with auxiliary heater

Engine bearing cooling, model 201 (retrofitting) – rysunek

P22-5040–57

Fan shroud ring 0.0 ee eee ee eee remove, place over fan, install (20-3400). Intake air cowl 2.0.0… 0.002002 remove, install (09-0060). Torsion bar of side member slacken, fold down, install. Both engine mounts at bottom ………….. unscrew, screw on (25 Nm). Engine 20… 2 eee ee ee eee raise, lower. Right engine carrier (6) and shield (5) ……… remove, replace, install. Right engine compartment encapsulation (3) with cooling pipe (1) …………-..20000fit parts, install.

smut RA 22.1112-2140/1

Right cross member for bolt (2a) ………… mark and drill 3.5 mm dia. Cooling pipes (1) and (2) fit together. Cooling pipe (2) 02 eee eee attach to right cross member with bolt (2a). If air conditioner fitted: bracket of left air conditioner line 00.0. ee eee unscrew, screw on. Left engine compartment encapsulation (7) ….. install. Note USA model: engine compartment encapsulations (3) and (7) «2. are fitted as standard.

«mime = RA 22.1112-2140/2