Removing and installing oil pump
WIS 18-2100
Preceding work: Operation no. of operation texts and work unils or standard texts Ow sump removed (01-3100). and flat rates 18-6020 – 18-6025
P18-5260–57
1 M8 20 bolt 3 M6 x 25 bolt + washer
2 M8 X 35 bolt + washer (hexagon socket) 4 Dowel sleeve
Bolt (1) of oil pump drive gear (6) …..–.—- unscrew, screw on (32 Nm) Oil pump drive gear (7) at oil pump (6) ……..- pull off, fit on.
Installation note
Install oil pump drive gear (6) with convex face pointing toward oil pump (6) (arrows). Pay attention to position of tensioning bracket relative to oil pump.
a RA 18.1133-2100/1
Oil pump (6)… 2.2… ee ee ee eee eee unbolt, take off to the front, bolt on (25 Nm)
Installation note
Clean strainer of oi! pump. Fill oil pump (6) with engine oil before installing so that it pumps engine oil as soon as it starts.
Tightening torques in Nm
| Bolt of oil pump drive gear | 32 |
| Bolts of oil pump | 25 |
Special tool
ie RA 18.1133-2100/2

