Removing and installing oil filter

WIS 18-1100

Removing and installing oil filter – rysunek

Preceding work: Operation no. of operation texts and work units or standard texts Air cleaner removed (09-1051). and flat rates 18-3090 – 18-3800

Replaceable cartridge (3) remove, install (18-0020) with wrench socket 103 589 02 09 00. Plug connection (B5x1) of oil pressure sensor (B5) —_ unplug, plug in. Models 107, 126: oil pressure sensor (B5) ….. unscrew, screw on (20 Nm). On engine 103.942/981/982 with automatic transmission: oil-water heat exchanger (19) ….. remove, install (18-1320). Cable (14) of crankshaft position sensor at holder (10) 2.2.2. 2.0.2. cee ee eee unclip, clip in place. M8 X50 screws (11) and M8 X30 (12) …….. unscrew, screw on (25 Nm). Oil filler (1) 2… ee eee remove, install.

mite RA 18.1133-1100/1

Sealing surfaces 0.2… 5.000002 cee eee clean. Gasket (13) 2.0… 2. ee eee eee replace. Engine oil level 0.2.0.0… 020 eee ee ee eee check, adjust to correct level. Engine 2.0… cee ee ees run, check for leaks.

Tightening torques in Nm

Oil filter screws25
Oil pressure sensor to oil filter20

Special tools

Removing and installing oil filter – rysunek
Removing and installing oil filter – rysunek
Removing and installing oil filter – rysunek
Removing and installing oil filter – rysunek

103589020900 _/

Modified gasket between oil filter and

crankcase

The present version (B) is pierced only in the area of the feed and return which ensures f . improved leaktightness. Production breakpoint: 07/1988

«aime =RA 18.1133-1100/2