134 Check and correct fluid level of power steering
Revision: Oil level checkup of cold oil and measure added. All models
Oil types
Automatic transmission fluid (ATF) refer to , Specifications for Service Products’’ page 236.2 Or manual transmission oil refer to ,,Specifications for Service Products’’ page 237
with mounted suppiy tank nh Supply tank
with cast-on supply tank 3 Closing cover ® With oil at operating temperature (approx. 80 °C) the oil level should reach up to punched-in or cast-in mark (approx. 20 mm below rim of tank) in supply tank, add oil if required
For cold oi! at ambient temperature, oi! level B—8 mm below mark.
- Mount closing cover, watching out for correct seat of paper gasket. Screw-on wing nut or knurled nut.
2a Mark in supply tank


