180 Oil change, rear axle

All models

Oil types

For rear axle without differential with limited Hypoid transmission oil SAE 90 slip (positive traction) approved oils refer to ,,Specifications for Service Products’ page 235

For rear axle with differential with limited slip Special hypoid transmission oil SAE 90 (positive traction) approved oils (observe refer to ,,Specifications for Service Products’ page 235.3 reference plate on rear axle housing)

Oil quantities

Model Liters

100 3.25

107.023/024/043/044, 116.028/029/03 1.3

108, 109, 111, 113 2.5

with closing cover 1st version 1.15 114, 115 ~ — with closing cover 2nd version 1.0

107.022/042, 116.020/024/025, 123 1.0

Special tool

OSs Socket/box wrench 14 x 17 mm ih PF ou-ort – 000 589 24 07 00

Conventional tool

Screw driver insert 14 mm, 1/2’’ square e.g. made by Hazet, D-5630 Remscheid, no. 985–14

Note

180 Oil change, rear axle – rysunek

When checking and changing oil vehicle must be free standing on wheels.

Before changing oil check sealing on rear axle!

Carefully tighten drain and filler screws.

  • Drain oil only with rear axle at operating temperature.
  • Top up with recommended quantity of oil.
  • Check level of oil: level must reach top of oil filler opening. Models 100, 108, 109, 111, 113

iain

180 Oil change, rear axle – rysunek
180 Oil change, rear axle – rysunek

Models 100, 108, 109, 111, 113 Rear axle with differential with limited slip (positive traction) (single joint swing axle} 1 Reference plate for rear axle with differential with limited slip (positive traction) 2 Closing plug of filler hole

180 Oil change, rear axle – rysunek

Models 107.023/024/043/044, 116.028/029/03 Rear axle with differential with limited slip (positive traction) (diagona} swing axle with large center piece} 1 Reference plate for rear axle with differential with limited slip (positive traction)

180 Oil change, rear axle – rysunek

Models 114, 115 Closing cover Ist version

Models 114, 115 Closing cover 2nd version Models 107, 116 and 123