Introduction and maintenance system
The present maintenance manual comprises all the maintenance jobs on passenger cars models 200 D to 600 (production starting January 1968).
In addition to detailed illustrated descriptions the manual contains all the testing and adjusting data as well as filling capacities, service products (fluids) , tightening torques and special tools.
Each individual maintenance job has anumber (job item) which is always printed in outer, upper corner of the page in ascending order and filed according to ascending numbers. The job item in maintenance manual is identical with that on work sheets, so that during the completion of the maintenance jobs the required texts and data will be immediately available.
Particularly extensive job items are subdivided according to models or engines (refer to list of contents).
The models or engines to which these jobs apply are named underneath job items.
if models or units with the same designation must be separated due to different versions, models or units for Germany and all countries to which these versions apply unchanged are called standard version.
Models or units for given countries are comprehensively called national version and the individual national versions are identified by the national vehicle symbol of the respective country.
Australia CE) Spain G) Japan CS) Sweden USA @a) South Africa
|f required for additional identification, the respective model year is placed behind the national symbol.
Example: Engine 115 G@s® 1976
\f the designation of models or units does not include the additions: standard version, national version or a national symbol, the respective data apply to al! the models or units shown in this connection.
A survey of all the maintenance jobs is provided by the list of contents which is subdivided according to groups.
Daimler-Benz Ak tiengeselischaft Zentraikundendienst
February 1979
Ne
This ‘Maintenance Manual – Volume 1” is intended for the technical personnel assigned to handle the maintenance jobs to be performed. The Manual contains the descriptions of all maintenance jobs for the maintenance system starting January 1968 for the following models:
Model Engine Maintenance system from 1/68 to
107.042 110.986 8/79 3) 107.022 110.982/992 *) 280 SLC 107.022 110.986
107.043 16.982/992 4) 350 SL a 2 107 107.043 6.984 ?)
107.023 6.982/922 3) 350 SLC 107.023 116.984 ?) 2/80 >) 107.044 17.982/992 1) 450 St 107.044 117.985 ?)
107.024 117.982/992′) 450 SLC
300 SEL 109.016 130.981
280 SE 3.5 Coupe 11.026 116.980 (end of production) 280 SE 3.5 Convertible 111.027 116.980
113 280SL 13.044 130.983 2/7\ (end of production)
1) Low compression, 2) With low compression same engine designation. 3)
a
ghia
Model Engine Maintenance system from 1/68 to
80.954/955 4) 230.6 14.015 80.954/955 +) 230.6 long 14.017 180.954/955 3) 230.6 ambulance 4.005 80.954/955 4) 230.6 station wagon 4.007 180.954/955 1) 230.6 ambulance long 4.008
14.920/923 4) 250 114.010 30.923/933 4) 250 4.011 114 10/76 114.920/923 4) 250 C 4.021 (end of production) 30.923/933 1) 250 C 14.023 114.980/981 3) 250 CE 14,022
110.921/931 3) 280 14.060 110.981/991 3) 280E 14.062 110.921/931 3) 280 C 4.073 110.981/991 3) 280 CE 14.072
200 D 615.913
220 D 220 D long 220 D ambulance 220 D station wagon 220 D ambulance long
115 12/76 (end of production)
240 D 3.0 15.114 617.910
15.923/926 +) 200 5.015
15.920/924 }) 220 15.010 5.920/924 }) 220 ambulance 5.000 5.920/924 !) 220 station wagon 5.002
15.951 ?) 230.4 115.017 — 115.951 ?) 230.4 ambulance 115.005
1) Low compression. 2) With low compression same engine designation.
Model Engine Maintenance system from 1/68 to
116.024 110.985
116.025 110.983/993 3) 280 SEL 116.025 110.985
116.028 116.983/993 4) ne SE 116.028 116.9852) 7/80 — — nae — (end of production) 116.029 116.983/993 !) 350 SEL 116.029 116.985 2)
116.032 117.983/993 4) 450 SE 116.032 117.9862)
116.033 117.983/993 450 SEL 116.033 117.9862)
240 TD 23.183 616.912
9/804)
300 CD @sa) 123.150 617.912
250 123.026 123.9202) 250 long 123.028 123.9202) 5/80 4) 250 T 123.086 123.9202) vie 250 special body !ong 3) 123.003 123.920?) 280 123.030 110.923 2) 280 E 123.033 110.984 280 TE 123.093 110.984 8/794) 280 C 123.050 110.923) 280 CE 123.053 110.984
ee —
In addition to the detailed illustrated descriptions of Models or units for given countries are comprehenthese jobs, all the testing and adjusting data, as well as sively called National Version and the individual filling capacities, service products, tightening torques national versions are identified by the national symbol and special tools are also included. for motor vehicles of the respective country. Australia Each individual maintenance job has a number (job G@®) Switzerland item), which is printed respectively at the righthand &) Spain or lefthand top. The job item in Maintenance Manual G) Japan is identical with that on work sheets, so that the Cs) Sweden respective texts and data can be turned up at once @® USA whenever required. South Africa
The job items in this manual have 3 digits, those in lf required for differentiation, the respective model Volume 2 have 4. year is named behind the national symbol.
Particularly voluminous job items are subdivided \f the additions: standard version, national version or according to models or engines (see Contents). a national symbol are not shown when the models or units are identified, the respective data apply to al! the Below the job items are the models or engines to models or units indicated in such a case. which these jobs refer. A survey covering all the maintenance jobs is provided If models or units with the same designation must be by the list of contents, which is subdivided according separated owing to different versions, models or units to groups. for Germany and al! countries, where these versions are accepted unchanged, are called Standard Version. Daimler-Benz Aktiengesellschaft Zentralkundendienst
August 1984
General inform
ation concerning maintenance system
Routine maintenance Maintenance service
Under normal conditions and normal demands, If the mileage in a year is less than 15 000 km, perform routine maintenance applies to the following mileage: at least once a year. The respective scope is shown in work sheets. Lubrication service — diesel engines up to 8/79 every 5000 km Severe operating conditions from 9/79 to 9/80 every 7500 km In the event of severe operating conditions or higher — gasoline engines every 7500 km demands, such as predominating city (urban) or short distance driving, frequent driving on mountain roads, Engine 100.985 every 15000 km poor road conditions, high dust and mud rate, trailer operation, sharp sports-style driving etc., maintenance Maintenance service every 15000 km jobs may be required at shorter intervals, e.g.:
Additional jobs for — Brake linings on front axle, check. maintenance service every 45 000 km Tires, check.
— On models 108, 109, 111 and 113: Front and rear Lubrication service axle, grease.
If the mileage in a year is less than 5 000 km, — Engine oil change without filter change additionally 7 500 km or 15 000 km, lubrication service is in-between lubrication jobs. required at least twice a year (in spring and fall):
— With automatic transmission: Oil change without 101 With oi! bath air filter: Oil level, check, correct. filter change every 22 500 km.
151. Engine oil and filter change. — Air cleaner element, clean or renew.
156 Supplementary oil filter for hydraulic fan coupling, clean: Special maintenance measures Model 100 only. Brake fluid, renew once a year, best in spring. 250 Front and rear axle, grease: Model 108, 109, 111, 113 only. Check coolant prior to start of or during the cold season for its resistance to cold (antifreezing charac415 Engine regulating linkage (throttle control) and teristics}. Renew coolant after three years. regulating shaft, lubricate.
Renew air cleaner element on dry air cleaners after 813 Engine regulating linkage (throttle control), three years, if the mileage during this time is less than check, 45 000 km.
788 With Stromberg carburetor: Oil level in damper, check, Confirmations
The performance of al! lubrication and maintenance jobs at the correct date must be confirmed in maintenance booklet.
General information concerning maintenance system
Reference stamps as a reminder for the next service Attachment of reference stamps or maintenance job and for the next change of brake fluid are in maintenance booklet. On frame of driver’s door: Lubrication or maintenance jobs.
In engine compartment: Change of brake fluid i Service job / Maintenance job
MB maintenance system Passenger cars
L] Maintenance jobs every 15,000 km/9,000 miles (1 Work additional to maintenance schedule
MAINTENANCE JOBS TO BE PERFORMED
MB maintenance schedule Replace brake fluid with/without engine oil change and filter service (Perform once a year, preferably in spring) Oil brand/ viscosity ___
LI Antifreeze charge OC Replace cooling water / antifreeze charge after 3 years at the latest In addition, use anticorrosion oil
and lightliy grease sliding rails
in spring)
headlamp setting lenses and reflectors
terminal clamps and grease
care compartment kage
SRT TP nn inne
Maintenance jobs
Lubrication Enter depth of tread in mm Lubrication jobs 350 Door hinges
Oil change
393 Door locks C) 151 Engine: Oi! and filter change 395 Hood (refer to order) 415 Throttle tinkage rods and shafts Check and correct fluid level Engine In case of excessive fluid loss, diagnose and eliminate at extra charge Mechanical work 121 Manual transmission (202 Air cleaner element: 130 Rear axle Clean with normal dust accumulation, Break in parking brake as specified replace with high dust accumulation Filter service Replace every 45,000 km/ 28,000 miles O 757 Check V-belt condition and tension 156 Auxiliary oil filter for hydraulic fan drive clutch: Clean LJ 751 Compression: Check Type 100 C1 758 Valve clearance: Adjust 1 770 Spark plugs: Replace Lubrication jobs CJ 773 Breaker points: Replace C) 250 Grease Nipples of front and rear axle C782 Dwell angle and firing point: Adjust Types 108, 109, 111, 113 (1 806 Injection engine: Replace filter of auxiliary air valve Compressed-air reservoir: Maintenance (1 813 Throttle linkage: Check ease of movement Drain condensate I 785 Heater flaps: Spray, check function (1 028 Front axle: Check joints for condition and Check for leaks and condition and ease of movement rubber boots for leaks Type 100 OOo 038 Cooling and heating system 701 Brake system: Bleed 041 Fuel system Type 100 045 Clutch control 713 Compressed-air brake booster: _| 087 Air suspension system Clean bleeding bores on face end 023 Central hydraulic system Type 100 Type 100 Retighten nuts and bolts Check and correct fluid level Adhere to tightening torque specifications! Chassis and body In case of excessive fluid loss, diagnose and CJ 922 Front axle eliminate at extra charge (1 025 Check steering free play, as well as looseness Lower control arm bearing pins: [1] 120 Automatic transmission and condition of steering linkage Hexagon head belts Li 134 Power steering 706 Parking brake: Readjust Types 108, 109, 111, 113 ‘Types 108, 109, 111, 113 135 Manual steering 924 Steering: Mounting bracket 712 Check and clean disc brakes, to do so, 463 Air suspension: Antifreeze unit remove brake pads 099 Function test 469 Windscreen washing system C1 741 Check brake lines for damage [1 Headlamps, lamps, horn 484 Air conditioner 983 Wheels: Dismount mount. oo00 OO 510 Clutch control Headlamp cleaning system Rims: Check condition, inspect inside for {1 Windscreen wipers, windscreen washer system 700 Brake system dirt accumulation 800 Injection pump C) 982 Tires: Inspect tread depth and wear pattern, 098 Operational test Engines 100.980/.981/.982/.983 check for damage. 821 Battery (road test/test stand) If necessary, rotate wheels 990 Radiator OOO Clutch Check anticorrosion / antifreeze content Manual transmission 494 Central hydraulic system Automatic transmission Type 100
Work additional to maintenance schedule – Every 45,000 km/ 28,000 miles Lubrication Chassis and body Lubrication jobs C1 009 Parking brake: (1 380 Level contro! valve linkage: Oil change Check for free operation of brake cables Install maintenance-free ball joints C) 170 Automatic transmission L] 030 Propeller shaft: (1) 388 Front wheel bearings: Check flex discs for wear Renew grease packings in hubs Filter service LJ 470 Air suspension antifreeze unit: Check nuts and bolts for tight seating – 174 Automatic transmission: Replace air cleaner Retighten as required Replace filter (497 Ventilation Perlon filter of front blower: 871 Intake exhaust manifold and exhaust flange Replace Maintenance (0 876 Carburetor flange Only as far as replacement filter is available. Requires separate order Type 100 Engine Air suspension C1 203 Air cleaner element: Replace L] 498 Heating system LI} §22 Vehicle ‘evel Perlon filter of solenoid valve: Cl 840 Fuel filter: Front axle control arm position and rear wheel Replace Replace filter or filter element camber: Check Only as far as replacement filter is available. Types 108, 109, 111, 113 In case of correction readjust headlamps. Requires separate order Requires separate order 849 Fuel filter: Replace filter element Type 100 LJ 676 Check spring bellows for cracks Type 100 501 Clutch: Check facing thickness Hairline cracks of outer rubber coating are [1 625 Toe-in of front wheels: Check of no concern. In case of large cracks replace spring bellows, however, at least every 90,000 km 56,000 miles
ES EPS TT EE ST enn EES nnn ET EE Service group Upon completion, combine with order! Ready on: Time: Order completed: 10 800.99.296.00 02
MB maintenance system Passenger cars
Maintenance jobs every 15,000 km/9,000 miles L] Work additional to maintenance schedule
MAINTENANCE JOBS TO BE PERFORMED
MB maintenance schedule [1 Replace brake fluid with / without engine oil change and filter service (Perform once a year, preferably in spring) Oil brand viscosity
LJ Antifreeze charge OS Replace cooling water / antifreeze charge after 3 years at the latest In addition, use anticorrosion oil
Maintenance jobs
Lubrication Engine Lt 706 Parking brake: Readjust CJ) 742 Check and clean disc brakes, to do so, 202 Air cleaner element:
Oil change
remove brake pads Clean with normal dust accumulation, C1 714 Check brake lines for damage 151 Engine: Oil and filter change replace with high dust accumulation C1] 983 Wheels: Dismount / mount. {refer to order) Replace every 45,000 km / 28,000 miles C] 205 Oil bath air cleaner Rims: Check condition, check inside for
Check and correct fluid level
Service air cleaner and fill with fresh oil dirt accumulation In case of excessive fluid loss, diagnose and Engines 615, 616 (1) 982 Tires: inspect tread depth and wear pattern, eliminate at extra charge 757 Check V-belt condition and tension check for damage. LJ 121 Manual transmission O 751 Compression: Check lf necessary, rotate wheels
Li 130 Rear axle
Gasoline engines 753 Valve clearance: Adjust Except for engines with hydraulic valve Maintenance clearance compensation elements Oo oO OOO 770 Spark plugs: Replace Check for leaks and condition 772 Firing point: Check, adjust if required 773 Breaker points: Replace {J 038 Cooling and heating system Except engines with breakerless ignition 041 Fuel system 782 Dwell angle and firing point: Adjust 045 Clutch control Except engines with breakerless ignition C1 085 Level control 797 \dle speed adjusting knob: C] 086 Hydropneumatic suspension Check adjustment and adjust Break in parking brake as specified Diesel engines Check and correct fluid level 798 Idle speed: Check, readjust In case of excessive loss, diagnose and Diesel engines eliminate at extra charge 806 Injection engine: OOOnNoOOo0o0 120 Automatic transmission Replace filter of auxiliary air valve Engines 114, 130 134 Power steering OO 813 Throttle linkage: Check ease of movement 135 Manual steering 785 Heater flaps: Spray, check function 138 Level control and ease of movement 139 Hydropneumatic suspension Engines 115, 123 Retighten nuts and boits 465 Windscreen washing system Adhere to tightening torque specifications! 484 Air conditioner, automatic climate control 810 Clutch control 895 Alternator: Mounting bracket Diesel engines 700 Brake system 924 Steering: Mounting bracket 788 Stromberg carburetor 800 injection pump Function test (with pneumatic control) Headlamps, lamps, horn 821 Battery Headlamp cleaning system 990 Radiator Check anticorrosion / antifreeze content Windscreen wipers, windscreen washer system pneumatic suspension gas-filled pressure reservoirs: Check for leaks and condition of Lubrication jobs 98 Operational test rubber boots OOOO (road test /test stand) 350 Door hinges _! 025 Check steering free play, as well as looseness 375 Outside rear view mirror Clutch and condition of steering linkage 393 Door locks Manual transmission 028 Front axle: Check joints for condition and 395 Hood tubber boots for leaks Automatic transmission 415 Throttle linkage rods and shafts
Work additional to maintenance schedule – Every 45,000 km/ 28,000 miles Lubrication Chassis and body Check nuts and bolts for tight seating – Retighten as required LJ 009 Parking brake: Oil change CJ 871 Intake /exhaust manifold Check for free operation of brake cables C170 Automatic transmission Except 110 engine L} 030 Propeller shaft: Exhaust flange Check flex discs for wear Filter service (1 876 Carburetor flange 501 Clutch: Check facing thickness 4115 engine C1 174 Automatic transmission OO 625 Toe-in of front wheels: Check Replace filter 631 Front axle: Replace grease packings of front wheel bearings, check tapered roller bearings Maintenance Type 116.036 Engine Lubrication jobs (] 203 Air cleaner element: Replace LJ 388 Front wheel bearings (1 844 Fuel prefilter: Check Renew grease packings in hubs Diesel engines Types 107, 114, 115.0, 115.1, C1) 845 Replace fuel filter 116, 123.0, 123.1 Diesel engines Cl 847 Replace fuel filter Except 115 engine
nt APS ey Service group Upon completion, combine with order! Ready on: Time: Order completed: 12 800.99.295.00 02






















