Oś czasu

Najważniejsze wydarzenia z dziejów Daimlera, Benza i Mercedes-Benz, od wynalezienia samochodu po rok 1997.

Źródło: encyklopedia Mercedes-Benz na CD (1997). Tekst oryginalny po angielsku.

1670–1679

1673: Christian Huygens’ powder machine

In 1673 the great physicist and mathematician Christian Huygens presents his powder machine to a Parliamentary Secretary of Ludwig XIV of France. In a vertical cylinder an air diluted space is created by means of a piston, leather claps as valves, and gun powder as fuel. After the explosion stroke the piston is again torn to the bottom and a weight is lifted via rolls. In doing so important features of the combustion engine are created. Doing this on a regular basis, however, is not possible yet. The combustion engine is the evolution version of the steam engine.

1760–1769

1768: Nicolas-Joseph Cugnot

The son of a farmer of Lothringen, born in 1725, works as an engineer in the Austrian army before becoming someone who is talked about as an inventor and special journalist in Paris. In 1768 he presents the project of a steam vehicle. It is to serve as a tractor for the artillery. The construction costs of the vehicle are paid by the state. On a test run the vehicle which is hard to steer crashes against a wall. A second and improved version cannot be constructed due to lack of funds. Under Napoleon its construction is brought to an end, in the period between 1797 and 1799 it is tested.

1770–1779

1776: The „Voltasche Pistole” („Volta´s pistol”)

In 1766 Alessandro Volta shows that explosive gases can be ignited by an electric spark.. For the first time these chemo-physical principles are applied with the „Voltasche Pistole”(„Volta´s pistol”). As a demonstration object it is highly esteemed in interested circles because of its harmless exploive effect. Later on this becomes a fundamental area of application in motor construction, the electric ignition of the gas and air mixture..

1800–1809

1807: Isaac de Rivaz

Taking the „Voltasche pistole” as an incentive,the Swiss Isaac de Rivaz makes proposals for the design of a motor-driven vehicle. In 1807 he is granted a patent for this. As driving unit a simple and light-weight hydrogen gas engine shall be used. The postal trip would become cheaper not only because of the advantages of mechanics compared with horses but also because the engine does not cause any expenses when it stands idle, de Rivaz writes prophetically. His project will not be realized as people interested in the project cannot be found

1840–1849

1840: English steam bus

The steam vehicle of the 19th century pioneers the motorization of today´s traffic. Several inventors go to trouble to invent a street vehicle with a steam drive, primarily as a bus. Through the French mathematician and philosopher Blaise Pascal the name and the kind of vehicle has been introduced in 1962 – at that time it had still been drawn by horses. The steam buses are still laden with major technical shortcomings and the bad street conditions also prevent a general introduction of them. It is already in these inventions that the desire for a kind of vehicle later to become important for mass traffic, becomes obvious.

1860–1869

1860: Lenoir-engine

In the 19th century the town gas is becoming more and more important in the big cities. Its use in motors is planned as well. The engine by Jean Joseph Etienne Lenoir, for the first time shown to the public in 1860, is among the most important developments. It is constructed as a driving engine for commerce and industry and produced on an industrial basis for many years to come. With this engine a basis for pioneering in the field of machine building is laid.

1870–1879

1876: Four-stroke engine by Nikolaus Otto

Induced by the Lenoir-engine the trader of for colonial goods, Nikolaus August Otto, turns to the construction of gas engines for industrial and commercial purposes. Together with his friend and partner, Eugen Langen, he designs a gas engine that is awarded the „Grand Prix” on the World Exhibition in 1867. In 1867 he founds the Gasmotoren-Fabrik Deutz together with Langen. Gottlieb Daimler becomes Technical Director, the designer-in-chief becomes Wilhelm Maybach. In 1876 Otto constructs the first four-stroke engine which goes down in history as the „Otto-engine”. In 1886 the Reichsgericht („German Supreme Court”) has to deal with attempts at circumventing Otto´s patent and, as a result, the principle of the four-stroke engine becomes free.

1879: First Benz two-stroke-engine

As a young entrepreneur Karl Benz is affected by the negative effects of recession with his „Fabrik für Maschinen zur Blechbearbeitung”. In 1877 all his tools are seized by the bailiffs due to a debt amounting to 2,000 marks. To get back on a firm footing he starts developping a gas engine for stationary purposes. In 1879 on New Year´s Eve his two-stroke engine runs for the first time. He is granted patents for it in France and England. In 1883 new engines are launched on the market.

1880–1889

1883: Benz & Cie.

In order to produce his two-stroke engines „Sytem Benz” in series, Karl Benz founds the „Offene Handelsgesellschaft Benz & Co., Rheinische Gasmotorenfabrik” together with the trader Max Kaspar Rose and the commercial traveller Friedrich Wilhelm Eßlinger on 1st October 1883. In 1899 the entreprise is converted into a joint.stock company and the new name is „Benz und Co., Rheinische Gasmtorenfabrik”.

1883: The first fast-running combustion-engine

After having left the company Gasmotorenfabrik Deutz founded by Nikolaus Otto, Gottlieb Daimler develop a fast-running test engine together with Wilhelm Maybach in Cannstatt. On 16 December 1883 the principle – a four-stroke engine with hot-tube ignition – is granted a patent under the number 28022 by the Kaiserliche Patentamt (The Emperial Patent Office). Planning right from the beginning to use his motor as a vehicle-drive, Gottlieb Daimler knows that it also has to be fuelled by petrol.

1885: Die „Standuhr”(„The grandfahther-clock”)

The so-called „Standuhr” („grandfather-clock”), an engine with vertically mounted cylinder and built according to the new principle of construction, brings the breakthrough for Gottlieb Daimler and Wilhelm Maybach.In the beginning the „Standuhr” has a performance of 1 hp at 6,000 rpm and has important improvements compared with the first test engine – there is, above all, the evolution version of the control of the curve grooves which now regulates the inlet and discharge valve. Together with another great invention by Maybach, the float-type carburetor (not yet realized in the „Standuhr”) the foundations for a useable vehicle engine are laid. The new engine is given its nickname due to the similarity with the clocks of that time.

1885: Daimler riding car

After the successful test runs of the „Standuhr” Gottlieb Daimler and Wilhelm Maybach realize their real aim: the drive of a vehicle through a motor. In order to keep down the design expenses, they decide in favour of a bicycle. In the patent specifications no. 36432 of 29th August 1885, the features of the world´s first street-legal motor-cycle are described. Pictured is Wilhelm Maybach.

1886: Benz patent-motor vehicle

On 29th January 1886 the patent DRP 37435 for the Benz-motor vehicle is granted. The first driving tests already take place at the end of the year 1885. In the Ringstraße in Mannheim the amazed spectators watch the first public drive of an automobile on 3rd July 1886. Two months later, on 5th September 1886, the Generalanzeiger of the City of Mannheim reports on the beginning of the production of street vehicles at Benz. The photo shows Karl Benz at the wheel of a patent-motor-car of the third version of the year 1887.

1886: Daimler motor carriage

On 8th March 1886, Gottlieb Daimler orders a carriage at the Wagenfabrik Wilhelm Wimpff & Sohn in Stuttgart. It is delivered on 18th August. Again an engine according to the one of the „Standuhr” is used. At 700 rpm it does around 1.5 hp, the speed limit is 16 km/h. In the back of the car sits Gottlieb Daimler, at the wheel sits his son Adolf.

1886: Daimler motor-boat on the Neckar

Right from the beginning it is Gottlieb Daimler´s intention to use his engines in a huge variety of ways. Therefore he does not stick to using them as driving units in street vehicles but also equips a boat with his combustion engine. In the autumn of 1886 the first test drives of a boat equipped with a Daimler-engine are done on the Neckar.

1888: Marcus-car

Siegfried Marcus from Mecklenburg, is very inventive in his home of choice, Vienna. At first, in 1870, he constructs a motorized hand-cart. 18 years later, the first Austrian automobile with a four-stroke engine is constructed by him. He does not work consequently on developping vehicles until they can be produced in series but concentrates on the production of stationary engines..

1888: Wölfert´s airship

After having successfully used his combustion engine in land and water vehicles, air-vehicles are still missing. Induced through the tests with guided balloons of the bookseller Dr. Karl Wölfert, Gottlieb Daimler and Wilhelm Maybach design a 2 hp one-cylinder -engine in 1888. On 12th August Wölfert´s air ship with Daimler-engine climbs in the air from the Daimler factory yard. This is the first motorized flight in the history of aviation.

1890–1899

1890: Founding of the Daimler-Motoren- Gesellschaft (DMG)

After having realized the dream of motorizing vehicles on land, at sea and in the air, the little workshop in a garden shed behind the Daimler mansion becomes too small. Caused by the successful demonstration of Daimler-engines in vehicles, trams, boats, and air ship, the demand rises steadily. In order to increase production, Gottlieb Daimler acquires a factory site at the Seelberg in Cannstatt. The financial foundations, too, are in need of a broader basis. This is the reason for Daimler to found the Daimler Motoren-.Gesellschaft (DMG) together with his partners Wilhelm Lorenz and Max von Duttenhofer.

1890: Wilhelm Maybach designs the first four-cylinder four-stroke engine

With the 4-cylinder- four-stroke engine designed by Wilhelm Maybach in 1890, the constructive foundations for modern machine building are laid. The engine destined to be installed in ships, weighs 153 kg and does 5 hp at 620 rpm.

1893: Benz Viktoria

Until the beginning of the 90s, Karl Benz´s vehicles are three-wheeled. With the design of a working axle-pivot-steering the way is paved for four-wheeled vehicles. In 1893 the Benz „Viktoria” is launched. The name recalls the victory over the steering problems. The photo shows Karl Benz at the wheel, next to him his daughter Clara.

1894: First automobile race in the world

On 22nd July 1894 the first automobile race in the world takes place from Paris to Rouen over 126 km. It is organised by the Paris „Petit Journal”. Overall there are 102 applicants, only 20 receive the permission to take part. The race becomes the clear evidence of the superiority of Daimler-engines: The first four places are taken by cars with engines built according to Daimler-licence. The average speed of the winner is 20.5 km/h.

1894: Benz Velo, the first series-automobile

The Benz Velo not only is the first small car but also the first car to be produced in series. Over 1,000 vehicles are constructed and sold. In the beginning the car is equipped with an engine which does 1.5 hp at 450 rpm. Pictured on the photo is Clara Benz, Karl Benz´s daughter.

1895: First motorized bus line

In 1894 Karl Benz constructs an „Omnibus” in the shape of a Landauer. This vehicle offers place for eight passengers and two drivers. In 1895 the first motorized bus line in the world is opened through the „Netphner Omnibus-Gesellschaft”. Two Benz intercity buses with 5 hp go regularly between the town of Siegen and the villages Netphen and Deuz.

1896: First lorry

In September 1896 Gottlieb Daimler presents the first lorry in the world with a combustion engine. On offer are four types with maximum loads between 1.5 and 5t. the „Phoenix-engine”, which is also used in the construction of passenger cars, is able to do between 3 and 12 km /h and is installed in the rear. The purpose of the superstructure´s suspension above the rear axle is not so much the protection of the load but that of the engine which is sensitive to vibrations.

1900–1909

1900: Gottlieb Daimler dies on 6th March

Gottlieb Daimler is increasingly weakened physically through interior quarrels about the management of the DMG. Since August 1888 he has been under medical treatment. On 6th March 1900 Gottlieb Daimler dies, eleven days before his 66th birthday.

1900: First drive of the Zeppelin on 2nd July

Daimler´s tests with air ship engines attract Graf Zeppelin´s attention. He visits the DMG. Thus it nearly goes without saying that the Zeppelin air ship LZ1 on its first drive on 2nd July 1900 is equipped with Daimler-engines. The two four-cylinder engines do 16 hp at 700 rpm respectively.

1900: Largest producer of automobiles

Apart from stationary engines the company Benz & Cie. delivers 603 automobiles, 341 of them abroad. In doing so Benz is the largest producer of automobiles in the world. On the photo are father Benz surrounded by his children in the factory´s yard in the Waldhofstraße.

1901: First Mercedes

Since 1893 the Austrian-Hungarian Consul General Emil Jellinek is a customer of the DMG as enthusiastic about automobiles as he is critical. His calls for more performance and higher security continuously leave their mark in the constructions from Cannstatt. Jellinek also acts as a car seller. In 1900 he orders 36 cars excelling through design features that are fundamentally new: larger wheel base, lower centre of gravity, and higher performance. As desired by Jellinek the car is called Mercedes after his daughter. On the „Woche von Nizza” the car is presented to the public.

1902: Works Marienfelde

By way of fusion the DMG takes over the „Motorfahrzeug- und Motorenfabrik Berlin A.-G.” (MMB) in Berlin-Marienfelde Four years ago the MMB emerged from the venerable company Altmann & Cie,also situated in Marienfelde. Although possessing Daimler-patents due to the memberships of Max v. Duttenhofer on the supervisory boards of DMG and MMB, the company is not doing well right from the outset. With the taking over of the MMB through the Daimler-Motoren-Gesellschaft a subsidiary is set up in Marienfelde in which the lorry-programme of the DMG is produced in future. In Cannstatt, on the other hand, people concentrate on the production of cars.

1903: Benz Parsifal

Since 1901 the company Benz in Mannheim has got into sales difficulties which are, up to a certain degree, caused by the sales success of the Mercedes.Therefore the product range has to be revised. In October 1902 the French designer Marius Barbarou becomes head of an additionally set up design bureau („French design bureau”). He designs a completely new model series. This is launched under the trade mark „Parsifal” at the beginning of the year 1903. It comprises three two-cylinder types with Cardan-drive (8, 10, and 12 hp) and a 16 hp four-cylinder model with chain drive.

1903: Fire in the works in Cannstatt

In the night from 9th June to 10th June 1903 a big fire destroys the whole production in Cannstatt. By means of double shifts they succeed in completing the first car constructed after the fire. . Through the fire desaster the removal to the new works in Untertürkheim having been set up since 1900 is accelerated. Production in this plant is taken up in December 1903. In February 1904 the last machine is brought from Cannstatt to Untertürkheim.

1903: Gordon-Bennett-race

Three weeks before the Gordon-Bennett-race in Ireland the 90 hp racing cars especially constructed for this race are destructed caused through the fire in the factory in Cannstatt In order to take part in the race, however, the DMG turns to three customers praying them to return three 60 hp racing cars that have already been delivered. The Belgian Camille Jenatzky wins on such a rented vehicle doing the distance of 592 km in a total time of 6 hours and 39 minutes. On some stretches of the route Jenatzky reaches a speed of 135 km/h. Jenatzky is also the first to have driven an automobile at more than 100 km/h.

1906: Mercedes-racing car with six-cylinder engine by Wilhelm Maybach

Performance of the Mercedes-vehicles increases steadily at the beginning of the century. The six-cylinder engine designed by Wilhelm Maybach, Gottlieb Daimler´s companion for years, does 120 hp. The cylinders are cast together in pairs, the vertically mounted valves are operated by camshafts laterally installed.

1908: Benz & Cie. expands

Regarding the DMG, the old production factories are becoming too small for the company Benz & Cie. at the beginning of the century. At the Luzenberg in Mannheim a new plant for 600,000 marks is built according to the latest standards (picture).. The new factory-hall is at ground level and connected with the railway. Being only equipped with machines for the production of passenger cars, it is advantageous that the company Benz & Cie. possesses shares of the „Süddeutsche Automobilfabrik Gaggenau GmbH” (SAF). In future commercial cars are produced in Gaggenau. In 1910 the works is finally taken over and the new name is „Benz-Werke Gaggenau”.

1908: Grand Prix of France

Since 1906 Paul Daimler, son of Gottlieb Daimler, is the new head of the racing department. Among other things he designs the two very successful Grand-Prix vehicles of 1908 and 1914. In 1908 a Grand Prix takes place in France which is the inofficial world championship of automobiles. Christian Lautenschlager wins this race on a Mercedes 130 hp-racing car. he does the 770km-long distance in an average speed of 111.5 km/h. The places two and three are taken by Benz-vehicles.

1909: Stroke „Benz” in the laurel wreath registered as trade-mark

After having limited its motor racing activities on reliability and long distance drives,the company Benz & Cie. does not want to close its minds to the advertising effectiveness of automobile racing that gets more and more popular. Entering into motor racing becomes absolutely successful for their company. At the Herkomer-drive in 1907 Fritz Erle carries off the overall victory. In the same year an own racing department is set up. The trade mark, registered in 1909, documents the successes in motor racing by means of a laurel wreath which surrounds the stroke „Benz”.

1909: The „Stern” („The star”) registered as trade-mark

The origins of the star go back to Gottlieb Daimler. On a picture postcard of Deuz, where he lives from 1873 to 1882, and where he thinks about developping a light and fast petrol engine until this is ready for production, he draws the sign of a star over his house. He says to his wife: „From here a star will rise”. Years later the creation of a trade mark for all products of the enterprise is planned. Gottlieb Daimler´s sons Paul and Adolf recall the story with the star. On 24th June the trident star is applied for with the bureau for protection of patterns and design.

1910–1919

1911: First Benz-engine with four-valve-technology

In 1911 Benz & Cie. for the first time constructs an engine with four-valve technique. The racing engine does 100 hp. Through four valves per cylinder a better filling and, thus, a higher performance is attained. In the Mercedes Grand-Prix of 1914 and in the 12-cylinder racing and record vehicles of the thirties the four-valve technique is applied as well.

1911: Blitzen-Benz („Lightning-Benz”) with 228 km/h

At the beginning of the year 1909 Viktor Ganß obtains the permission to design a car that should be able to run at over 200 km/h. The engine does 200 hp from 21.5 litres displacement. In 1910 the vehicle is shipped to America where it is called „Lightning Benz” („Blitz-Benz”). There it is used by the driver Barney Oldfield for record drives. In Daytona Beach Oldfield sets up a new world record with 211.4 km/h (our picture). In April 1911 Bob Burman even reaches the speed of 228.1 km/h (world record).

1912: Mercedes with Knight-engine

Among the numerous models of Daimler the Mercedes-Knight is a peculiarity. From 1910 to 1924 it is constructed in different variations. Paul Daimler, Wilhelm Maybach´s successor as head of the design bureau since 1907, acquires the patents of the American Knight in 1910. He does so to use the smooth-running, cultivated, and durable slide-valve engine in Daimler automobiles.The Knight-engine, however, proves to be susceptible to failure and needs to be maintained very often so that it will never catch on really. The poster´s original design by Ottofranz Kutscher shows two late Knight-models, around 1921.

1914: Grand Prix of France

As already in 1908, a Mercedes wins the Grand Prix of France. The winner is again Christian Lautenschlager, Louis Wagner and Otto Salzer finish on the second and third places, respectively. All three were driving on a 115 hp Mercedes Grand- Prix-type with 4.5 litres displacement.

1915: Ralph de Palma wins in Indianapolis

In Europe the outbreak of World War I has brought all the racing activities to a standstill. In Europe the war is raging, whereas Ralph de Palma is winning the 500-miles of Indianapolis in a record time – average speed of 144.6 km/h – on a Mercedes 115 hp Grand-Prix-type of 1914. In doing so the first „classic” epoch of the automobile races comes definitively to an end.

1915: Construction of aircraft engines at Benz

With a stake in the „Süddeutschen Automobil-Fabrik” in Gaggenau since 1907 and the complete taking over of it in 1910, Benz & Cie. gains access to the construction of aircraft engines. After the outbreak of the First World War all the production machinery has to be switched over to military purposes. The aircraft engines are an important part of war production. Benz aircraft engines belong to the standard equipment of the army fliers. the photo shows a Benz aircaft engine of the type Bz DV with 250 hp on the engine test stand in Mannheim in 1914/15. After the DMG Benz & Cie. is the second biggest producer of aircraft engines in the First World War.

1916: Production of aircraft engines in Sindelfingen

The long tradition of aircraft engine construction makes the DMG an important supplier of the army fliers in the First World War. In 1915 they even run the risk of switching from the construction of aircraft engines to the production of complete aircraft. In Sindelfingen a site of 50,000 sqm is acquired and built upon. From 1916 to 1918 high-capacity and hunting planes are constructed, for the one part own constructions, for the other part licence-constrcutions of the department of aircraft construction in Friedrichshafen (Zeppelin). The photo shows a hunting plane L6 (DI) with @8-cylinder-Vee-engine doing 200 hp.

1920–1929

1922: Diesel-engines in street vehicles

In 1919 the company Sendling in Munich together with the company Benz & Cie. found the „Benz-Sendling Motorpflüge GmbH” with registered office in Berlin..In 1921 production is switched to Mannheim. In June 1922 a test series of five Benz-Sendling engine ploughs of the type S equipped with precombustion Diesel-engines, is constructed. The performance is 25 hp, later on 30 hp. In doing so Diesel-engines are installed in street vehicles for the first time.

1922: Graf Masetti wins at the Targa Florio

After the break caused through the war the DMG again has taken an active part in racing since 1921.In this year Max Sailer wins the Cappa Florio, the prize for the fastest series vehicle of the Targa Florio. A year later Graf Masetti carries off the overall victory – on a Mercedes Grand-Prix racing car of 1914 (picture). In the class of „the series cars over 4.5 litres” Max Sailer wins on a Mercedes 28/95 hp with compressor. This is the first time a Mercedes compressor engine appears in a race.

1922: Benz droplet car

Already at an early stage people at Benz are interested in the aerodynamic tests of Edmund Rumpler whose famous plane „Rumpler Taube” („Rumpler pigeon”) was driven by a Benz-engine. After the war Benz turns to the automobile construction. Benz develop his principles in the type RH, a vehicle in droplet form. The middle motor car strongly resembles the monoposti of the sixties already. On the photo the Benz RH as sports car in 1924.

1922: Series-production of compressor vehicles

In 1916 the development of compressor-engines starts at the DMG – with aircraft engines. After the First World War the compressor technique is introduced in automobile construction. In 1922 the series production of compressor vehicles starts with the Mercedes 6/25/40 hp and 10/40/65 hp The first number states the taxation hp, the second the real hp with and the third the real hp without compressor switched on.

1923: Benz low-floor vehicle type MS

The „3t- Benz-low floor vehicle” of the type MS is to facilitate the loading and unloading of lorries at the refuse collection. The low level at which work is done makes work easier for the dustmen. The engine is situated next to the driver´s seat. Despite the progressive and future-oriented design only few people buy the vehicle.

1924: Low-floor bus

The experience gained in the construction of the „low-floor vehicle” is used in the construction of „low-floor buses” . The lowering of the frame not only contributes to the vehicle´s becoming more comfortable but also makes for higher active security due to the lower position of the centre of gravity. On the photo Benz-Gaggenau buses of the type 2 CN and 3 CN in Schramberg in 1924

1924: Diesel-lorry at Benz

The introduction of the Diesel-engine for commercial cars is a mile-stone in the technical field. Independently from one another engineers of benz & Cie. and of the DMG work on the development of the Diesel-engine for lorries. On 8th February 1924 zhe first Diesel-vehicle in the world, a Benz for 5t of maximum load with a precombuction chamber system is presented on the Amsterdam Automobile Salon. Until the beginning of the thirties Diesel-engines are called crude oil engines. This is reflected in the term „OM” for „Ölmotor” still used today.

1926: Fusion to become the Daimler-Benz AG

The steadily difficult economic situation – in 1923 Daimler produces less automobiles than in 1910 – is the reason a partner is looked for in Mannheim as well as in Stuttgart-Untertürkheim. In terms of quality and image Benz & Cie. and the DMG are created for each other. The thought of fusion – already existant in 1919 – is revitalised. In 1924 the economic pressure is so strong that an interest community is set up for the time being. The former competitors are becoming partners. The Mercedes-Benz Automobilgesellschaft mbH already carries the name of the future joint product. In June 1926 the amalgamation treaty comes into force. Out of the two oldest automobile enterprises in the world the Daimler-Benz AG is created.

1927: Rudolf Caracciola wins on the Nürburgring

After the fusion a model series comes into being that earns world fame: the sports car types S (for sports), SS (for super-sports), SSK (for Super-Sports-Kurz), SSKL (for Super-Sports-kurz-Leicht). The engines are made of light metal and equipped with a compressor that enables performances of up to 300 hp. Therefore the vehicles are often used for racing purposes. On 18th June 1927 Rudolf Caracciola wins the opening race on the Nürnurgring in a superior way with number one on a model S.

1928: Type Stuttgart

With the fusion the economic difficulties are by no means. The most important vehicle in the programme of Daimler-Benz since 1926 has been the 8/38 hp because it is the vehicle that sells best. In 1928 this vehicle is completely revised by Hans Nibel, Ferdinand Porsche´s successor as technical Director. In future it is offered unter the designation of „Stuttgart” and sold more than 13,000 times.

1929: Type Mannheim

In autumn 1929 the type Stuttgart is partnered by a second middle class vehicle with a six-cylinder-engine without compressor, the type Mannheim with @ 3.5 litre engine (14/70 hp). The type Mannheim is produced up to 1934 like the type Stuttgart..

1929: Karl Benz dies

Since 1904 Karl Benz has been member of the supervisory board of the company benz & Cie., after that he is at the Daimler-Benz AG where he stays until 1927. In 1928 he is honoured with the Badische Staatsmedaille. On 4th April 1929 Karl Benz dies at the age of 84 years in hi house in Ladenburg where he lived since 1906.

1929: Wilhelm Maybach dies

Wilhelm Maybach, born on 9th February 1846 in Heilbronn as the son of a master carpenter, is Gottlieb Daimler´s faithful comrade for many years. In 1907 he leaves the DMG in his capacity as Technical Director and dedicates himself to the support of his son who is about to found the Maybach-Motoren GmbH. On 29th December 1929 Wilhelm Maybach dies in Bad Cannstatt.

1930–1939

1930: Grand Mercedes

In autumn 1930 the new special model of the Daimler-Benz AG is presented on the Paris Salon Im Herbst . The Mercedes-Benz type 770, also called „Grand Mercedes”, possesses a 7.7-litre tyre -@ 8-cylinder-engine. The representative vehicle of which scarcely more than 100 units are produced in the first version up to 1938, is used as a car for official ceremonies and functions in many states.

1931: Caracciola wins at the Mille Miglia

Rudolf Caracciola is the sensational winner of the One Thousand-miles race of Brescia („Mille Miglia”) in a new record time on a Mercedes-Benz model SSK. For the 1,635 km from Brescia to Rome he needs 16 hours and 10 minutes which is the equivalent of a n average speed of 101 km/h.

1931: Type 170

Just in time to balance the effects of the world economic crisis a relatively small, economic and favourable vehicle of high quality is produced. The Mercedes-Benz type 170 is presented on the Paris Salon in 1931. the vehicle is equipped with single wheel suspension. Despite the six-cylinder engine the 170 is offered at an extremely favourable price and contributes to the fact that the Daimler-Benz AG overcomes the world economic crisis very well. In 1932 4 481 vehicles are constructed; this number is higher than the total number of passenger cars produced in the previous year.

1934: W 25 -The first „Silberpfeil” („silver arrow”)

In 1932 the International Union of automobile clubs in Paris proclaims a new racing formula that is to be valid from 1934 onwards. The weight of the Grand Prix racing cars – with wheels bur without tyres, fuel, oil, and rerigerants – is limited on a maximum of 750 kg. In the following year Daimler-Benz announces its return into racing. With the W 25 a racing car is developped that is successful right from the beginning. In the following years the „Silberpfeile” aare very successful. The photo shows Rudolf Caracciola on the W25 in the Klausenrennen in 1934. I

1935: Streamlined bus

The ever increasing speed and the competition between railway and road lead to tests on buses with streamlined bodyworks. The Mercedes-Benz Lo 3100 is planned to be used for fast automobile trip of the Deutsche Reichsbahn. It is equipped with a Diesel-engine of 55 hp and transports 22 passngers with a speed of up to 115 km/h.

1936: Type 260 D

The fact that the Diesel-engine has asserted itself in the field of commercial cars induces Daimler-Benz to construct a Diesel-passenger car In february 1936 the Mercedes-Benz is the big sensation on the Berlin automobile exhibition. The first Diesel passenger car in the world constructed in series is produced nearly 2,000 times until 1940 and is used primarily as a taxi.

1936: Type 170 V

in Berlin the Mercedes-Benz 170V is presented with the type 260D. The four-cylinder model replacing the six-cylinder type 170 (W15) becomes the Mercedes-Benz passenger car of the pre-war period produced . In the years from 1936 to 1941 overall more than 70,000 vehicles of all variations of bodyworks. The „V” in the type designation stands for a peculiarity in the range of Mercedes-Benz-models of those years. . Das „V” in der Typenbezeichnung weist auf eine Besonderheit der Modellpalette von Mercedes-Benz jener Jahre hin. Es steht nämlich für den – wie üblich – vorn eingebauten Motor. Nötig ist das „V”, um den Wagen vom gleichzeitig angebotenen Typ 170 H mit Heckmotor zu unterscheiden, dem allerdings kein großer Erfolg beschieden ist.

1937: DB 601 aircraft engine

Since 1926 the limitations in the construction of aircraft engines laid down in the treaty of Versailles have been relaxed. In the design department of Daimler-Benz large aircraft enginers are constructed again. A peak in aircraft construction is the DB 601 with petrol injection. Due to speed and charging pressure increase this engine gearbox unit with its 34 litres displacement makes for several record flights in the futur. Its erformance is at normal 1,200 hp instead of up to 2,700 hp.

1938: Speed record by Caracciola

On 28th January 1938 Rudolf Caracciola sets up new records in the class B (5-8 litres) on the Mercedes-Benz record car with 5.66 litres-12-cylinders-engine in the class B (5-8 litres) : 1 kilometre with flying start 432.7 km/h., 1 mile with flying start 432.4 km/h. This is the highest speed ever reached on a normal street: he drives on the motorway Darmstadt-Frankfurt.

1940–1949

1942: Arms production

All of the industrial enterprises of the Deutsche Reich are converted to arms production: In autumn 1942 vehicle production in the works in Untertürkheim are completely stopped. Instead of that aircraft or marine engines are produced or repaired. Like in the First World War more and more women work in the production.

1944: Destruction

Since 1943 the works of the Daimler-Benz AG are not spared the bomb raids of the Allied Forces. In 1944 the works in Untertürkheim, Sindelfingen, Gaggenau, and Mannheim are hit hard. For the time being they cannot be reconstructed

1945: New start as repair shop

The war destructions are so enormous that the existence of the enterprise is in doubt. The first orders after the war are repair works not only on own vehicles but also on American ones.

1947: Reconstruction

The production of vehicles starts again slowly. In October 1947, the production of the 1,000th passenger car since the end of war, a type 170 V, is celebrated. In 1949 it is already 1,000 cars that are produced per month.

1948: Unimog is presented

Since summer 1945 Daimler-Benz engineers and an agronomist have developped the universal motor device. In 1948 the Unimog is presented and produced by Boehringer in Göppingen in the following year. In 1951 Daimler-Benz takes over its production.

1949: Type 170 S and 170 D

The first passenger car models designed after the war, are the models 170 V and 170 D. In May 1949 they are presented on the Technical Export Fair in Hanover. The 170 D is the first Diesel-car of the after-war period.

1950–1959

1950: L 6600

In Gaggenau the L6600 is presented as the first new lorry-design after the war . From 1954 onwards it is called L315. The 13t-lorry becomes an important pillar of the goods traffic in the period of the „Wirtschaftswunder” („economic miracle”).

1951: „Adenauer-Mercedes”

The star model in the fifties is the Mercedes-Benz type 300. It becomes known as the official car of Konrad Adenauer who loves being chauffeured at a high speed. On his journeys abroad either, he doesn´t want to do without the luxury features of his 300. In the vernacular the whole construction series is given the nickname „Adenauer”.

1952: 300 SL racing vehicle

With the sensational gullwing-door vehicle the Daimler-Benz AG very successfully resumes its activities in the field of racing. Already in the first racing season races in Bern, on the Nürburgring, in Le Mans as well as in the Carrera Panamericana in Mexico – the hardest race for sports cars with 3,371 km – are won.

1953: Mercedes-Benz do Brasil

An important step to creating further markets is the founding of the Mercedes-Benz do Brasil in which Daimler-Benz has a stake of 25 %. for the time being. In 1956 the first lorry of the type L311 is completed in Sao Bernardo da Campo.

1953: „Pontoon-Mercedes”

In April 1953 the first Mercedes-Benz passenger car is produced that has a self-supporting pontoon-type bodywork firmly welded with the chassis. For this model and the similar types of the same model-generation the term „Ponton-Bercedes” comes into use.

1954: Return to Formula racing

1954 : With the W196 the „Silberpfeile” are here again. The season´s opening race in Reims is already a very big success – the photo shows the second placed Karl Kling. At the end of the season the Mercedes-driver Juan Manuel Fangio is world champion.

1954: O 321 H with self-supporting bodywork

A year after the start of the production of the „Pontoon-Mercedes” the self-supporting bodywork is also introduced with buses. For buses the semi-integral design means independence of the lorry-chassis.

1954: Sports cars 300 SL and 190 SL

On the „International Motor Sports Show” in New York opened on 6th February 1954 two new sports cars cause a sensation. The 300 SL with its impressive gullwing doors is based on the racing car of the season 1952 but has an even stronger engine with petrol injection. The 300SL is produced from August 1954 onwards. The type 190 SL, the little brother of the one with the gullwing doors, is also presented in New York . It is revised in terms of style and not produced in series before May 1955..

1955: Pulling back from racing

World champion and vice world champion in Formula racing (Juan Manuel Fangio and Stirling Moss on W 196), trade-mark-championship for sports cars (300 SLR), European championship for touring cars (Werner Engel on 300 SL and 220 a),in the Mille Miglia double victiory for racing cars (Moss/Jenkinson and Fangio on 300 SLR), triple victory for sports cars (300 SL) and triple victory in the Diesel-class (180 D), American sports car championship (Paul O’Shea on 300 SL): After one of the most successful years Daimler pulls back from racing

1956: For the first time transporters

With the L 319 / L319 D and the respective mini bus version O 319/O319 D Daimler dares to start the production of transporters.The new construction-series sells very well during its eleven years of production.

1959: „Rear fins-Mercedes”

In August 1959 a fundamentally revised production programme of passenger cars is presented. The bodywork which has been uniform since 1961 for the two major model-series is drawn by Paul Bracq. The whole model generation is called after the rear fins reflecting the influence of the American spirit of the time. For the first time the security bodywork with crumpling zones is realized in a series passenger car.

1960–1969

1960: Rallye Monte Carlo

In 1960 the works teams Walter Schock / Rolf Moll, Eugen Böhringer / Hermann Socher and Roland Ott / Eberhard Mahle set off for Warsaw where the rallye Monte Carlo starts for them. Nobody expects them to win there. But in the end of the race that is traditionally finished through the „Nacht der langen Messer” („night of the long knives”), they cross the finishing line as winners in the same order. Their vehicle: Mercedes-Benz 20 SE.

1962: Ewy Rosqvist / Ursula Wirth win in Argentina

The sensation of the year 1962 is the convincing overall victory of the Swedish ladies-team Ewy Rosqvist/Ursula Wirth in the murderous „Große Straßenpreis für Tourenwagen” in Argentina. The duo wins on their Mercedes-Benz 220SE all of the six single stages of the rallye with an overall length of 4,624 km breaking all the existing records.

1963: Type 230 SL

Successor of the 190SL is the type 230SL. For the first time an SL-model with automatic gear box can be delivered. The most conspicuous design-feature of the bodywork done by Paul Bracq is the concavely shaped detachable coupé roof. This so-called „Pagodenform” („pagoda-shape”) is based on ideas of Béla Barényi and makes for a high stability despite a light construction.

1963: Type 600

The sensation on the International Automobile Exhibition (IAA) in Frankfurt is the Mercedes-Benz 600. The vehicle is conceived to be a representation car for the highest demands, on the other hand it can also be used as a sports car. Among the customers is also the Vatican that receives a special model for the pope.

1965: Lorry production in Wörth

Five years after the site was acquired the production of lorries is started in the new works in Wörth on the Rhine. Due to the moving of the lorry-assembly out of the original works in Mannheim and Gaggenau and their uniting in Wörth, production is done in a far more efficient way. The first lorry produced in Wörth is the LP608.

1967: Standard city-line bus

The O 305 is the contribution of Daimler-Benz to the concept of the standard city-line bus as it is laid down in the guidelines of the „Verband Öffentlicher Verkehrsbetriebe” (VÖV) (union of the public traffic businesses) The series-production starts at the beginning of the year 1969.

1968: „Strich-Acht-Mercedes”(„Dash eight Mercedes”)

In January 1968 six types of the 200D with four-cylinder Diesel-engine up to the 250 with six-cylinder carburetor-engine are presented as the new generation of the middle class. The unofficial designation „Strich-Acht” („dash eight”) is derived from the year of apparition. The new middle class proves to be very popular, the „Strich-Acht” becomes the first vehicle of Daimler-Benz to be produced in mass-series.

1968: „Type 300 SEL 6.3”

The type-series of the upper category constructed since autumn 1965 is added by a new top model: the type 300 SEL 6.3 litre with the 6.3litre-V8 engine from the 600. On the Geneva Automobile Salon in March 1968 where it is presented it makes a big splash with its sports car-like driving performance.

1969: C 111

the C111 with a triple-disc Wankel-engine arouses attention worldwide. As a „rollendes Versuchslabor” („rolling test laboratory”) it has a peculiar bodywork in extreme wedge shape of fibreglass reinforced plastic. Although numerous orders are received in Untertürkheim, the C111 remains an experimental vehicle and is not produced in series.

1969: Hydraulically tilting driver´s cab

With the LP1632 and the LPK1632 Daimler-Benz introduces hydraulically tilting driver´s cab. the LP/LPK1632 is voted „car of the year” by the special press.

1970–1979

1970: The first generation of the ALS

The performance of a first generation of the Anti-Lock-System (ALS), developped in cooperation with Teldix, is demonstrated to the press in December 1970. The still analog electronics are a stumbling stone in the development of a car that is produced in series..It is not before the second generation developped together with Bosch that the system is reliable enough to be installed in series vehicles.

1970: ESF (Experimental security vehicles)

From 1970 onwards the Daimler-Benz technicians work on a series of experimental security vehicles (German abbreviation:ESF). Their aim is to improve the impact protection. In 1974 the ESF 24 represents the last vehicle of the series (photo).

1972: Mercedes-Benz „S-Klasse”

A completely new developped vehicle generation of the upper category is presented in September 1972. The construction series, internally called W116, is the first one with the offical name „Mercedes-Benz S-class”. For the first time the double-wishbone front wheel suspension with zero kingpin offset and brake dive support is realized having already been tested in the C111.

1974: O 303

The new travel coach from Mannheim serves as a model. In the 18 years it is produced it is constructed 38,085 times in Germany alone, 12,307 times of it as a chassis for external superstructures. Therefore it happens quite often that the O 303 is internally called „Weltmeister” („world champion”) in a loving way.

1976: Construction-series 123

The „Strich-Acht”- models of the construction-series 114/115 are replaced by a completely new designed type-series with the internal designation W123. In the nine years it is produced the W123 becomes the hitherto most successful construction-series of the Daimler-Benz AG with nearly 2.7 millions of constructed units.

1978: T-model

With the Mercedes-Benz T-series (internally: S 123) the production of which starts in spring 1978 in the works in Bremen, a combination-model constructed at home is part of the official sales-program. The „T” stands for „Touristik und Transport”(„tourism and transport”). The model 300_TD (1979) is the first Mercedes-Benz passenger car with turbo-engine available on the domestic market.

1979: Construction-series 126

Apart from rising the driving comfort and the security the new S-class is conceived under the point of view of reducing the energy consumption. Compared with the predecessor models the consumption of fuel is reduced by 10 %. The passenger cell stays intact even after an offset crash with 55 km/h. The S-class is the first passenger car-type in the world to meet these requirements.

1979: Cross-country car

With the G-types Daimler-Benz is active in the construction of cross-country cars. The vehicles are developped together with the Austrian company Steyr-Daimler-Puch AG in Graz and constructed there as well. Two different wheel bases, different variations of superstructures, and two petrol- and Diesel-engines respectively are on offer.

1979: Bandama-rallye

The SL/SLC-construction-series of the seventies (R/C-107) is not necessarily conceived for the use in sports cars and sometimes it lacks the manoeuvring qualities but it excels in long-distance trips. In the version 450_SLC_5.0 the car dominates e.g. the African rallye Bandama 1979. After 5,668 kilometres Daimler carries off a quadruple victory. Mikkola/Hertz stand on top of the winners´ stairs.

1980–1989

1980: Airbag

Already at an early stage Daimler-Benz is aware of the potential that lies in the airbag-technique. At the end of the sixties the first tests are started. The development of the airbag takes 13 years in total until it comes off the assembly-line as a world novelty in a model of the S-class.

1982: Compact class-types 190 and 190 E

The presentation of the compact limousines of the types 190 and 190E on 8th December 1982 is an event awaited full of suspense by the special press and the public. Both models do not replace their predecessor types but complement the traditional passenger car programme by a third major line. Concerning security the 190-models are on a par with those of the S-class.

1983: 50 000-km record drive in Nardo

With the sports version of the 190- construction series, the 190E 2.3-16, Mercedes-Benz keep trying to set up records. In Nardo in Italy 3 series vehicles of this type go 50,000 km at full speed. After 201 hours, 39 minutes, and 43 seconds the distance is covered by all three vehicles. Three world records and nine class records are set up.

1984: Construction-series 124

In December 1984 the completely new conceived middle class limousines of the construction-series 124 replace the models of the type series 123 having been constructed for 9 years. Nine months later new T-models but also electronic systems for the control of propulsion are presented: the 4MATIC, a four-wheel drive automatically disengageable when required, the automatic locking differential (ALD) and the automatic traction control (ATC). The variations of the construction-series 124 equipped with 4MATIC are the first all-wheel driven Mercedes-Benz passenger car-types. The photo depicts a block diagramme of the 4MATIC.

1986: 100 years of automobiles

The Daimler-Benz AG, from the two oldest automobile factories in the world, can celebrate the automobile´s 100th birthday with particular pride. The most important event apart from the ceremony and the travelling exhibition „world mobile” is the rearrangement of the museum in Stuttgart-Untertürkheim which belongs to the company.

1986: Catalytic converter as a standard fitting with petrol passenger cars

Since December 1986 controlled three-way catalytic converters belong to the standard delivery programme of all Mercedes-Benz petrol models.

1988: Official return to motor-racing

At the beginning of 1988 Daimler-Benz decides to return to racing, namely in the group A and C..The dark blue painted Sauber-Mercedes C9 wins another four races in this season. In the following year the heavy racing cars present themselves again in traditional silver.

1988: New heavy lorries

The new generation of heavy lorries (types 1726 to 2648) have been otimized regarding consumption, noise emission, and security. Special attention is paid to the driver´s seat designed according to the latest ergonomic findings.

1989: SL-construction-series 129

Apart from a microprocessor controlled intake camshaft adjustment the new roadster models 300SL/300SL-24/500SL (construction-series R129) have a roll bar that secures the passengers´ space for survival in the case of a turn over.

1990–1999

1991: cfc-free production of the new S-class

Apart from the traditional six- and eight-cylinder -engines an aggregat with 12 cylinders is offered for the first time for the new S-class with the internal designation W140. The S-class also points the way in terms of protection of the environment, since production does completely without the damaging fluorine-chlorine hydrocarbons. In 1992 the S-class receives the „Ozone Protection Award” by the US-environmental protection agency.

1991: The last „Silberpfeil” („silver arrow”)

On 26th November the board of directors of the Mercedes-Benz AG decides to withdraw from racing. In 1989 and 1990 Mercedes-Benz starts in 18 races in group C; in 16 of them its drivers finish as winners. In doing so Mercedes-Benz wins the title of world champion both for the drivers and for the team. The last „Silberpfeil”, the C 291 (photo), wins its last race in Autpolis, Japan, at the same time the last one of the racing season 1991.

1993: C-class (W 202)

With the successor of the construction-series 201 Mercedes-Benz presents the second generation of the compact class.With reference to the official designation of the large model-series, the S-class, it is called C-class; from now on the middle construction-series is called E-class.

1993: Study „Vision A 93”

The Mercedes-Benz study of a new compact-class of vehicles is presented on the IAA. Although the five-door vehicle only needs a surface of 5.6 sqm, it offers security like a large Mercedes.All of the driving aggregats and accessories are positioned underfloor. From 1997 onwards the new A-class, developped from the study „Vision A”, is constructed in Rastatt .

1995: New E-class

The new E-class limousines of the construction-series 210 become the successors of the construction-serie 124 which has become the most constructed type-series of Mercedes-Benz in its over 10 years of production. One of the features of the new models is their striking appearance. Apart from their numerous technical novelties it has the sensationally low drag coefficient of 0.27.

1995: DTM (German championship of touring cars)

In 1995, too, Mercedes-Benz takes part very successfully in the DTM, the German championship of touring cars and the International Touring Car series (ITC) with its racing touring cars of the C-class : eight victories in 13 races of the DTM and another 8 victories in 10 races of the ITC. The outstanding driver of the season is Bernd Schneider who wins both series. He can continue the winning series after Klaus Ludwig already won the championship in 1992 and 1993.

1996: New T-models

In spring 1996 both the C-class and the E-class are complemented by the T-model-variations. In doing so Mercedes-Benz also offers a combination-version in the compact-class for the first time (as shown on the photo).Both T-models excel in their classes through a particularly high loading volume.

1996: New T-models

In spring 1996 both the C-class and the E-class are complemented by the T-model-variations. In doing so Mercedes-Benz also offers a combination-version in the compact-class for the first time (as shown on the photo).Both T-models excel in their classes through a particularly high loading volume.

1996: SLK

From autumn 1996 onwards Mercedes-Benz offers a new compact roadster. Special feature is the novel Vario-top. With this the model can be converted within seconds into a weather-proof coupé. The Vario-top is made of metal and can be concealed in the boot after pressing a button.

1996: V-class

With the new S-class, originally announced as „Viano”, Mercedes-Benz is active in the field of the high-capacity passenger cars. Depending on the arrangement of the seats, the V-class offers a luggage volume of up to 4,500 litres. In the beginning a petrol and a Diesel-engine with 2.3 litres respectively are used.

1997: AAV (All-activity vehicle)

The spare time automobile AAV (All Activity vehicle) equipped with all-wheel drive is produced in the new Mercedes-Benz works in Tuscaloosa/Alabama in the U.S.A. From autumn 1997 onwards the AAV is offered in the U.S.; sales start in Europe is in 1998.