Mercedes-Benz 8/38 hp type Stuttgart 200













General
| Short name | 8/38 hp type Stuttgart 200 |
|---|---|
| Name | Mercedes-Benz 8/38 hp type Stuttgart 200 |
| Model | W 02 |
| Production | 1928 - 1933 |
| Number produced | 6.452 |
| Prices | 1929 / 1930-1931 / 1932 / 1933 chassis RM 5.880,- / 5.150,- / 4.600,- / 4.400,- saloon (4 doors) RM 6.880,- / 5.980,- / 5.500,- / 5.500,- open tourer (4 doors) RM 6.800,- / 6.980,- / 6.500,- / 5.500,- cabriolet NC RM - / 7.250,- / 6.700,- / 6.400,- special edition (1929) saloon (4 doors) RM 7.100,- open tourer (4 doors) RM 7.000,- sport two-seater RM 6.700,- cabriolet A RM 8.250,- cabriolet B RM 8.500,- cabriolet C RM 9.300,- |
Dimensions and weights
| Wheelbase | 2810 mm |
|---|---|
| Track front/rear | 1425/1425 mm |
| Length | 4060 mm (with bumpers 4380 mm) |
| Width | 1680 mm |
| Height | 1800 mm |
| Smallest turning circle | 12 m |
| Chassis | 850 kg |
| Weight empty | tourer: 1180 kg; saloon: 1300 kg; cabriolet: 1350 kg |
| Max. total weight | 1850 kg |
Engine
| Operating method | four-stroke Otto |
|---|---|
| Configuration | front, parallel; upright |
| Type | M 02 |
| No. of cylinders/configuration | 6 / in line |
| Bore x stroke | 65 x 100 mm |
| Total displacement | 1988 ccm (tax classification: 1977 ccm) |
| Compression ratio | 5,6; since 1930: 6,2 |
| Crankshaft bearings | 7 |
| Output | 38 hp at 3400 /min |
| Maximum torque | 10,6 mkg at 1400 /min |
| No. of valves/configuration | 1 intake, 1 exhaust / lateral, upright |
| Valve operation | 1 lateral camshaft |
| Camshaft drive | via spur gears |
| Mixture formation | 1 Solex carburetter 30 MOHLT, since 1931 Solex 30 BFLH |
| Cooling | water cooling / pump; 15 l water |
| Lubrication | pressure circulation lubrication / 8 l oil |
Electrical system
| Electric system | 12 V |
|---|---|
| Battery | 45 Ah |
| Dynamo | 75 W |
| Starter motor | electrical / 0,6 PS |
Fuel system
| Fuel tank | in the engine compartment / 45 l |
|---|
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | cardan shaft |
| Frame design | U-type sectional pressed-steel frame |
| Wheel suspension front | rigid axle |
| Wheel suspension rear | rigid axle |
| Suspension front | split springs |
| Suspension rear | split springs |
| Steering | screw spindle/nut, left or (exportation) right |
| Braking system | mechanical, effective on front- and rear wheels |
| Parking brake | mechanical, effective on rear wheels |
| Wheels | sheet steel-spoked wheels |
| Wheel rims | drop centre rim |
| Tyres | 5,25-20, since 1933 5,25-18 |
Gearbox and performance
| Gearbox | 3-speed gear shift, from 1930 also with add. overdrive |
|---|---|
| Shifting | Control lever car center |
| Clutch | Single-plate dry clutch |
| Type of gearbox | Pinion change gear |
| Gear ratios | I. 3,40; II. 2,00; III. 1,0; S. 0,76 |
| Differential ratio | 6,62; 5,66 or 6,10 |
| Maximum speed | 80 km/h |
| Fuel consumption | 15 l |