Mercedes-Benz type 280 SEL 3.5

















































General
| Short name | 280 SEL 3.5 |
|---|---|
| Name | Mercedes-Benz type 280 SEL 3.5 |
| Model | W 108 E 35/1 |
| Production | 07.70/03.71 - 08.72 |
| Number produced | 951 |
| Comments concerning the production period | begin of production - pre-production batch / main production - end of production |
| Prices | 02.71: 27.306,00 DM 01.72: 28.416,00 DM |
Dimensions and weights
| Wheelbase | 2850 mm |
|---|---|
| Track front/rear | 1482/1485 mm |
| Length | 5000 mm |
| Width | 1810 mm |
| Height | 1440 mm |
| Smallest turning circle | 12,12 m |
| Weight empty | 1585 kg |
| According to guideline | DIN 70020 (with fuel, spare wheel and tool equipment) |
| Max. total weight | 2085 kg |
| Max. front axle weight | 995 kg |
| Max. rear axle weight | 1090 kg |
| Max. load | 500 kg |
| Max. trailer weight braked | 1200 kg |
| Max. trailer weight unbraked | 750 kg |
Engine
| Operating method | four-stroke Otto (with manifold-injection) |
|---|---|
| Configuration | front, parallel; upright |
| Type | M 116 E 35 / 116.980 |
| No. of cylinders/configuration | 8 / 90°-V-form |
| Bore x stroke | 92 x 65,8 mm |
| Total displacement | 3499 ccm (tax classification: 3459 ccm) |
| Compression ratio | 9,5 |
| Crankshaft bearings | 5 |
| Output | 200 hp at 5800 /min |
| Maximum torque | 29,2 mkg at 4000 /min |
| No. of valves/configuration | 1 intake, 1 exhaust / overhead |
| Valve operation | 1 top camshaft per cylinder line |
| Camshaft drive | duplex roller-type chain |
| Mixture formation | manifold-injection, electronically controlled (Bosch D-Jetronic) |
| Cooling | water cooling / pump; 13,2 l water |
| Lubrication | pressure circulation lubrication / 7,5 l, first 6,5 l oil |
Electrical system
| Electric system | 12 V |
|---|---|
| Battery | 66 Ah / in the engine compartment |
| Dynamo | three-phase AC / 770 W |
| Starter motor | electrical / 1,4 PS |
| Ignition | transistor ignition |
Fuel system
| Fuel tank | in the rear / 82 l |
|---|---|
| Fuel supply | electric supply pump |
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | divided cardan shaft |
| Frame design | floor assembly / self-supporting all-steel body |
| Wheel suspension front | double wishbone |
| Wheel suspension rear | single-joint swing axle with hydropneumatic compensating spring und level control |
| Suspension front | coil springs, suppl. rubber suspension, torsion bar type stabilizer |
| Suspension rear | coil springs, supplementary rubber suspension |
| Dampers | hydraulic telescopic damper |
| Steering | ball-and-nut power steering |
| Steering ratio | 17,2:1 / 3,2 steering wheel turns |
| Braking system | hydraulic dual-circuit braking system with vacuum-operated brake servo unit, effective on front- and rear wheels ; disc brakes front and rear |
| Parking brake | mechanical, effective on rear wheels |
| Brake diameter | brake discs front / rear: 273 / 279 mm |
| Wheels | sheet steel-disc wheels, on demand light-alloy disc wheels |
| Wheel rims | drop centre rim 6 J x 14 HB |
| Tyres | 185 V 14 (6 PR); on demand: 185 VR 14 |
Gearbox and performance
| Version 1 | Version 2 | |
|---|---|---|
| Gearbox | 4-speed gear shift | 4-speed autom. gear shift |
| Availability | Series | by request |
| Shifting | Feed control | Switch lever at steering wheel or in car center |
| Clutch | Single-plate dry clutch | hydr. clutch in the autom. gear |
| Type of gearbox | Pinion change gear | Planet gear |
| Synchromesh gears | I - IV | |
| Gear ratios | I. 3,96; II. 2,34; III. 1,44; IV. 1,0; R. 3,72 | I. 3,98; II. 2,39; III. 1,46; IV. 1,0; R. 5,47 |
| Differential ratio | 3,46 | 3,46 |
| Maximum speed | 210 km/h | 205 km/h |
| Acceleration | 9,0 s | 9,4 s |
| Comments | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons |
| Fuel consumption | 13,0 l | 13,0 l |
| Acc. to guideline | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % |