Mercedes-Benz type 280 SE

















































General
| Short name | 280 SE |
|---|---|
| Name | Mercedes-Benz type 280 SE |
| Model | W 108 E 28 |
| Production | 11.67/01.68 - 09.72 |
| Number produced | 91.051 |
| Comments concerning the production period | begin of production - pre-production batch / main production - end of production |
| Prices | 01.68: 18.590,00 DM 07.68: 18.759,00 DM 11.69: 19.647,00 DM 08.70: 20.535,00 DM 01.71: 21.589,50 DM 01.72: 22.477,50 DM 05.72: 23.110,20 DM |
Dimensions and weights
| Wheelbase | 2750 mm |
|---|---|
| Track front/rear | 1482/1485 mm |
| Length | 4900 mm |
| Width | 1810 mm |
| Height | 1440 mm |
| Smallest turning circle | 11,68 m |
| Weight empty | 1495 kg |
| According to guideline | DIN 70020 (with fuel, spare wheel and tool equipment) |
| Max. total weight | 1995 kg |
| Max. front axle weight | 920 kg |
| Max. rear axle weight | 1075 kg |
| Max. load | 500 kg |
| Max. trailer weight braked | 1200 kg |
| Max. trailer weight unbraked | 750 kg |
Engine
| Operating method | four-stroke Otto (with manifold-injection) |
|---|---|
| Configuration | front, parallel; upright |
| Type | M 130 E 28 / 130.980 |
| No. of cylinders/configuration | 6 / in line |
| Bore x stroke | 86,5 x 78,8 mm |
| Total displacement | 2778 ccm (tax classification: 2748 ccm) |
| Compression ratio | 9,5 |
| Crankshaft bearings | 7 |
| Output | 160 hp at 5500 /min |
| Maximum torque | 24,5 mkg at 4250 /min |
| No. of valves/configuration | 1 intake, 1 exhaust / overhead |
| Valve operation | top camshaft |
| Camshaft drive | duplex roller-type chain |
| Mixture formation | manifold-injection, mechanically controlled; Bosch 6-plunger-type injection pump |
| Cooling | water cooling / pump; 10,5 l water |
| Lubrication | pressure circulation lubrication / 5,5 l oil |
Electrical system
| Electric system | 12 V |
|---|---|
| Battery | 55 Ah / in the engine compartment |
| Dynamo | three-phase AC / 490 W; since 12.70: 770 W |
| Starter motor | electrical / 1,4 PS |
| Ignition | battery ignition |
Fuel system
| Fuel tank | in the rear / 82 l |
|---|---|
| Fuel supply | electric supply pump |
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | divided cardan shaft |
| Frame design | floor assembly / self-supporting all-steel body |
| Wheel suspension front | double wishbone |
| Wheel suspension rear | single-joint swing axle with hydropneumatic compensating spring und level control |
| Suspension front | coil springs, suppl. rubber suspension, torsion bar type stabilizer |
| Suspension rear | coil springs, supplementary rubber suspension |
| Dampers | hydraulic telescopic damper |
| Steering | rec.-ball steering; on demand ball-and-nut power steering |
| Steering ratio | 22,8:1 / 4,1 steering wheel turns; w/ power steering: 17,2:1 / 3,2 swt. |
| Braking system | hydraulic dual-circuit braking system with vacuum-operated brake servo unit, effective on front- and rear wheels ; disc brakes front and rear |
| Parking brake | mechanical, effective on rear wheels |
| Brake diameter | brake discs front / rear: 273 / 279 mm |
| Wheels | sheet steel-disc wheels, since 08.70 on demand light-alloy wheels |
| Wheel rims | drop centre rim 6 J x 14 HB |
| Tyres | 7,35 or 185 H 14 (6 PR) |
Gearbox and performance
| Version 1 | Version 2 | Version 3 | Version 4 | Version 5 | |
|---|---|---|---|---|---|
| Gearbox | 4-speed gear shift | 4-speed gear shift | 5-speed gear shift | 4-speed autom. gear shift | 4-speed autom. gear shift |
| Availability | Series (until 05.69) | Series (from 05.69) | by request (from 05.69) | by request (until 05.69) | by request (from 05.69) |
| Shifting | steering wheel or feed control | steering wheel or feed control | Feed control | Switch lever at steering wheel or in car center | Switch lever at steering wheel or in car center |
| Clutch | Single-plate dry clutch | Single-plate dry clutch | Single-plate dry clutch | hydr. clutch in the autom. gear | hydr. clutch in the autom. gear |
| Type of gearbox | Pinion change gear | Pinion change gear | Pinion change gear | Planet gear | Planet gear |
| Synchromesh gears | I - IV | I - IV | I - V | ||
| Gear ratios | I. 4,05; II. 2,23; III. 1,40; IV. 1,0; R. 3,58 | I. 3,96; II. 2,34; III. 1,43; IV. 1,0; R. 3,72 | I. 3,96; II. 2,34; III. 1,43; IV. 1,0; V. 0,87; R. 3,72 | I. 3,98; II. 2,52; III. 1,58; IV. 1,0; R. 4,15 | I. 3,98; II. 2,39; III. 1,46; IV. 1,0; R. 5,47 |
| Differential ratio | 3,92 | 3,92; later 3,69 | 4,08; later 3,92 | 3,92 | 3,92; later 3,69 |
| Maximum speed | 190 km/h | 190 km/h | 190 km/h | 185 km/h | 185 km/h |
| Acceleration | 10,5 s | 10,5 s | 10,5 | 11,2 s | 11,2 s |
| Comments | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons | Acceleration with shifting through from 0 - 100 km/h; loaded with 2 persons |
| Fuel consumption | 12,3 l | 12,3 l | 12,3 l | 12,3 l | 12,3 l |
| Acc. to guideline | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % | DIN 70030, ascertained at 3/4 of max. speed, maximal 110 km/h, unter Zuschlag von 10 % |