Mercedes-Benz type 200









General
| Short name | 200 |
|---|---|
| Name | Mercedes-Benz type 200 |
| Model | W 21 |
| Production | 1933 - 1936 |
| Number produced | 9.281 |
| Prices | 1933-1934 / 1935-1936 / 1937 (since 09.36) chassis RM 4.400,- / 4.200,- / 3.700,- saloon 4 doors (case fixed) RM 5.300,- / 4.950,- / 4.450,- saloon 2 doors (with boot) RM - / 5.150,- / 4.450,- cabriolet C (case fixed) RM 6.400,- / 5.950,- / cabriolet C (with boot) RM - / - / 6.150,- / 5.650,- tourer "Mannheim" 2 doors RM - / 5.800,- / 5.800,- / 5.300,- tourer "Sindelfingen" 4 doors RM 6.500,- / 6.500,- / - / - Sport-roadster 2(2) seats RM 6.350,- / 6.200,- / 5.700,- Sport-cabriolet A 2/3 seats RM 7.800,- / 7.650,- / 7.150,- |
Dimensions and weights
| Wheelbase | 2700 mm |
|---|---|
| Track front/rear | 1340/1380 mm |
| Length | 4060 - 4150 mm |
| Width | 1630 mm |
| Height | 1580 mm |
| Smallest turning circle | 10,4 m |
| Chassis | 850 kg |
| Weight empty | 1130 - 1350 kg |
| Max. total weight | 1560 - 1700 kg |
Engine
| Operating method | four-stroke Otto |
|---|---|
| Configuration | front, parallel; upright |
| Type | M 21 |
| No. of cylinders/configuration | 6 / in line |
| Bore x stroke | 70 x 85 mm |
| Total displacement | 1961 ccm (tax classification: 1949 ccm) |
| Compression ratio | 5,75 - 6,0 |
| Crankshaft bearings | 4 |
| Output | 40 hp at 3200 /min |
| Maximum torque | 11,4 mkg at 1100 /min |
| No. of valves/configuration | 1 intake, 1 exhaust / lateral, upright |
| Valve operation | 1 lateral camshaft |
| Camshaft drive | via spur gears |
| Mixture formation | 1 updraught carburetter Solex 30 BFLV |
| Cooling | water cooling / pump; 11 l water |
| Lubrication | pressure circulation lubrication / 5 l oil |
Electrical system
| Electric system | 6 V |
|---|---|
| Battery | 75 Ah / under the driver's seat |
| Dynamo | 90 W |
| Starter motor | electrical / 0,6 PS |
Fuel system
| Fuel tank | in the engine compartment / 33 l, later 38 l |
|---|
Drivetrain and chassis
| Driven wheels | rear wheels |
|---|---|
| Power transmission | cardan shaft |
| Frame design | box-section pressed-steel low-bed frame |
| Wheel suspension front | 1 transversal spring each ,above and below, lever-type shock absorber |
| Wheel suspension rear | swing axle |
| Suspension front | transversal springs |
| Suspension rear | double coil springs |
| Steering | ZF-Roß worm-and-sector steering |
| Braking system | hydraulic, effective on front- and rear wheels |
| Parking brake | mechanical; external hand brake in front at the differential case |
| Wheels | disc wheels |
| Wheel rims | drop centre rim |
| Tyres | 5,25-17 or 5,50-17 |
Gearbox and performance
| Gearbox | 3-speed gear shift with add. overdrive |
|---|---|
| Shifting | Control lever car center |
| Clutch | Single-plate dry clutch |
| Type of gearbox | Pinion change gear |
| Gear ratios | I. 3,33; II. 1,71; III. 1,0; S. 0,73 |
| Differential ratio | 6,125 or 6,11 |
| Maximum speed | 98 km/h |
| Fuel consumption | 13 l |